[Zrouter-src] ZRouter.org: push to ZRouter boards/D-Link/DAP-1350/board.hints

[zrouter-src at zrouter.org]

details:   http://zrouter.org/hg/zrouter//rev/b65aa869e334
changeset: 280:b65aa869e334
user:      ray at terran.dlink.ua
date:      Wed Dec 14 21:43:52 2011 +0200
description:
Time to recall knowledge of DAP-1350

diffstat:

 boards/D-Link/DAP-1350/board.hints |  137 +++++++++++++++++++++++++++++++++++++
 1 files changed, 137 insertions(+), 0 deletions(-)

diffs (141 lines):

diff -r 16a2342c023e -r b65aa869e334 boards/D-Link/DAP-1350/board.hints
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/boards/D-Link/DAP-1350/board.hints	Wed Dec 14 21:43:52 2011 +0200
@@ -0,0 +1,137 @@
+# $FreeBSD: head/sys/mips/conf/RT305X.hints 224009 2011-07-14 11:53:23Z ray $
+# device.hints
+hint.obio.0.at="nexus0"
+hint.obio.0.maddr=0x10000000
+hint.obio.0.msize=0x10000000
+
+hint.nvram.0.sig=0xe5e60a74
+hint.nvram.0.base=0x1f030000
+hint.nvram.0.maxsize=0x2000
+hint.nvram.0.flags=3 # 1 = No check, 2 = Format Generic
+hint.nvram.1.sig=0x5a045e94
+hint.nvram.1.base=0x1f032000
+hint.nvram.1.maxsize=0x4000
+hint.nvram.1.flags=3 # 1 = No check, 2 = Format Generic
+
+# on-board Ralink Frame Engine
+hint.rt.0.at="nexus0"
+hint.rt.0.maddr=0x10100000
+hint.rt.0.msize=0x10000
+hint.rt.0.irq=3
+# macaddr can be statically set
+#hint.rt.0.macaddr="xx:xx:xx:xx:xx:xx"
+
+# on-board Ralink 2872 802.11n core
+hint.rt2860.0.at="nexus0"
+hint.rt2860.0.maddr=0x10180000
+hint.rt2860.0.msize=0x40000
+hint.rt2860.0.irq=4
+
+# uart0
+#hint.uart.0.at="obio0"
+#hint.uart.0.maddr=0x10000C00
+#hint.uart.0.msize=0x100
+#hint.uart.0.irq=12
+#hint.uart.0.flags="0x30"
+
+# uart1
+#hint.uart.1.at="obio0"
+#hint.uart.1.maddr=0x10000500
+#hint.uart.1.msize=0x100
+#hint.uart.1.irq=5
+#hint.uart.1.flags="0x30"
+
+
+# gpio
+# GPIO0  - WPS BTN	IN II IO
+hint.gpiobutton.0.at="gpiobus0"
+hint.gpiobutton.0.pins="0x01"
+hint.gpiobutton.0.name="wps"
+hint.gpiobutton.0.flags="0x0581"
+
+# GPIO7  - MODE SW AP	IN II IO
+hint.gpiobutton.1.at="gpiobus0"
+hint.gpiobutton.1.pins="0x80"
+hint.gpiobutton.1.name="mode_ap"
+hint.gpiobutton.1.flags="0x0581"
+
+# GPIO8  - ST LEDRED	OUT	/* 2pin BiDir RED/BLUE LED */
+# GPIO9  - ST LEDBLUE	OUT
+hint.gpioled.0.at="gpiobus0"
+hint.gpioled.0.pins="0x100"
+hint.gpioled.0.name="status_red"
+hint.gpioled.0.flags="0x0002"
+hint.gpioled.1.at="gpiobus0"
+hint.gpioled.1.pins="0x200"
+#hint.gpioled.1.name="status_blue"
+hint.gpioled.1.name="status"
+hint.gpioled.1.flags="0x0002"
+
+# GPIO10 - RST BTN	IN II IO
+hint.gpiobutton.2.at="gpiobus0"
+hint.gpiobutton.2.pins="0x400"
+hint.gpiobutton.2.name="reset"
+hint.gpiobutton.2.flags="0x0581"
+
+# GPIO11 - MODE SW CL	IN II IO
+hint.gpiobutton.3.at="gpiobus0"
+hint.gpiobutton.3.pins="0x800"
+hint.gpiobutton.3.name="mode_wlan_client"
+hint.gpiobutton.3.flags="0x0581"
+
+# GPIO14 - WPS LED	OUT II IO
+hint.gpioled.2.at="gpiobus0"
+hint.gpioled.2.pins="0x4000"
+hint.gpioled.2.name="wps"
+hint.gpioled.2.flags="0x0182"
+
+
+
+#0x00000000-0x00030000 : "Bootloader"
+#0x00030000-0x00040000 : "Factory"
+#0x00040000-0x00070000 : "Config"
+#0x00070000-0x000b0000 : "Language"
+#0x000b0000-0x001a0000 : "Kernel"
+#0x001a0000-0x01000000 : "RootFS"
+
+hint.map.0.at="cfid0"
+hint.map.0.start=0x00000000
+hint.map.0.end=0x00030000
+hint.map.0.name="bootloader"
+hint.map.0.readonly=1
+
+hint.map.1.at="cfid0"
+hint.map.1.start=0x00030000
+hint.map.1.end=0x00040000
+hint.map.1.name="factory"
+
+hint.map.2.at="cfid0"
+hint.map.2.start=0x00040000
+hint.map.2.end=0x00800000
+hint.map.2.name="upgrade"
+
+hint.map.3.at="cfid0"
+hint.map.3.start=0x00040000
+hint.map.3.end=0x00050000
+hint.map.3.name="config"
+
+hint.map.4.at="cfid0"
+hint.map.4.start=0x00000000
+hint.map.4.end=0x00000000
+hint.map.4.name="language"
+
+hint.map.5.at="cfid0"
+hint.map.5.start=0x00050000
+hint.map.5.end=0x00150000
+hint.map.5.name="kernel"
+
+hint.map.6.at="cfid0"
+hint.map.6.start=0x00150000
+hint.map.6.end=0x00800000
+hint.map.6.name="rootfs"
+
+
+hint.rt.0.phymask=0x1f
+hint.rt.0.media=100
+hint.rt.0.fduplex=1
+