[Zrouter-src-freebsd] ZRouter.org: push to FreeBSD HEAD tree
zrouter-src-freebsd at zrouter.org
zrouter-src-freebsd at zrouter.org
Sat Jan 21 22:38:42 UTC 2012
details: http://zrouter.org/hg/FreeBSD/head//rev/c912f3c9bbad
changeset: 292:c912f3c9bbad
user: ray at terran.dlink.ua
date: Sun Jan 22 00:40:32 2012 +0200
description:
New driver for DWC OTG controller by Hans Petter Selasky.
diffstat:
head/sys/dev/usb/controller/dwc_otg.c | 2612 ++++++++++++++++++++++++
head/sys/dev/usb/controller/dwc_otg.h | 437 ++++
head/sys/dev/usb/controller/dwc_otg_atmelarm.c | 199 +
3 files changed, 3248 insertions(+), 0 deletions(-)
diffs (3260 lines):
diff -r 6ace9965d408 -r c912f3c9bbad head/sys/dev/usb/controller/dwc_otg.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/head/sys/dev/usb/controller/dwc_otg.c Sun Jan 22 00:40:32 2012 +0200
@@ -0,0 +1,2612 @@
+/*-
+ * Copyright (c) 2012 Hans Petter Selasky. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/*
+ * This file contains the driver for the DesignWare series USB 2.0 OTG
+ * Controller. This driver currently only supports the device mode of
+ * the USB hardware.
+ */
+
+/*
+ * LIMITATION: Drivers must be bound to all OUT endpoints in the
+ * active configuration for this driver to work properly. Blocking any
+ * OUT endpoint will block all OUT endpoints including the control
+ * endpoint. Usually this is not a problem.
+ */
+
+/*
+ * NOTE: Writing to non-existing registers appears to cause an
+ * internal reset.
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD: head/sys/dev/usb/controller/dwc_otg.c 230424 2012-01-21 13:31:38Z hselasky $");
+
+#include <sys/stdint.h>
+#include <sys/stddef.h>
+#include <sys/param.h>
+#include <sys/queue.h>
+#include <sys/types.h>
+#include <sys/systm.h>
+#include <sys/kernel.h>
+#include <sys/bus.h>
+#include <sys/module.h>
+#include <sys/lock.h>
+#include <sys/mutex.h>
+#include <sys/condvar.h>
+#include <sys/sysctl.h>
+#include <sys/sx.h>
+#include <sys/unistd.h>
+#include <sys/callout.h>
+#include <sys/malloc.h>
+#include <sys/priv.h>
+
+#include <dev/usb/usb.h>
+#include <dev/usb/usbdi.h>
+
+#define USB_DEBUG_VAR dwc_otg_debug
+
+#include <dev/usb/usb_core.h>
+#include <dev/usb/usb_debug.h>
+#include <dev/usb/usb_busdma.h>
+#include <dev/usb/usb_process.h>
+#include <dev/usb/usb_transfer.h>
+#include <dev/usb/usb_device.h>
+#include <dev/usb/usb_hub.h>
+#include <dev/usb/usb_util.h>
+
+#include <dev/usb/usb_controller.h>
+#include <dev/usb/usb_bus.h>
+
+#include <dev/usb/controller/dwc_otg.h>
+
+#define DWC_OTG_BUS2SC(bus) \
+ ((struct dwc_otg_softc *)(((uint8_t *)(bus)) - \
+ ((uint8_t *)&(((struct dwc_otg_softc *)0)->sc_bus))))
+
+#define DWC_OTG_PC2SC(pc) \
+ DWC_OTG_BUS2SC(USB_DMATAG_TO_XROOT((pc)->tag_parent)->bus)
+
+#define DWC_OTG_MSK_GINT_ENABLED \
+ (DWC_OTG_MSK_GINT_ENUM_DONE | \
+ DWC_OTG_MSK_GINT_USB_SUSPEND | \
+ DWC_OTG_MSK_GINT_INEP | \
+ DWC_OTG_MSK_GINT_RXFLVL | \
+ DWC_OTG_MSK_GINT_SESSREQINT)
+
+#define DWC_OTG_USE_HSIC 0
+
+#ifdef USB_DEBUG
+static int dwc_otg_debug = 0;
+
+static SYSCTL_NODE(_hw_usb, OID_AUTO, dwc_otg, CTLFLAG_RW, 0, "USB DWC OTG");
+SYSCTL_INT(_hw_usb_dwc_otg, OID_AUTO, debug, CTLFLAG_RW,
+ &dwc_otg_debug, 0, "DWC OTG debug level");
+#endif
+
+#define DWC_OTG_INTR_ENDPT 1
+
+/* prototypes */
+
+struct usb_bus_methods dwc_otg_bus_methods;
+struct usb_pipe_methods dwc_otg_device_non_isoc_methods;
+struct usb_pipe_methods dwc_otg_device_isoc_fs_methods;
+
+static dwc_otg_cmd_t dwc_otg_setup_rx;
+static dwc_otg_cmd_t dwc_otg_data_rx;
+static dwc_otg_cmd_t dwc_otg_data_tx;
+static dwc_otg_cmd_t dwc_otg_data_tx_sync;
+static void dwc_otg_device_done(struct usb_xfer *, usb_error_t);
+static void dwc_otg_do_poll(struct usb_bus *);
+static void dwc_otg_standard_done(struct usb_xfer *);
+static void dwc_otg_root_intr(struct dwc_otg_softc *sc);
+
+/*
+ * Here is a configuration that the chip supports.
+ */
+static const struct usb_hw_ep_profile dwc_otg_ep_profile[1] = {
+
+ [0] = {
+ .max_in_frame_size = 64,/* fixed */
+ .max_out_frame_size = 64, /* fixed */
+ .is_simplex = 1,
+ .support_control = 1,
+ }
+};
+
+static void
+dwc_otg_get_hw_ep_profile(struct usb_device *udev,
+ const struct usb_hw_ep_profile **ppf, uint8_t ep_addr)
+{
+ struct dwc_otg_softc *sc;
+
+ sc = DWC_OTG_BUS2SC(udev->bus);
+
+ if (ep_addr < sc->sc_dev_ep_max)
+ *ppf = &sc->sc_hw_ep_profile[ep_addr].usb;
+ else
+ *ppf = NULL;
+}
+
+static int
+dwc_otg_init_fifo(struct dwc_otg_softc *sc)
+{
+ struct dwc_otg_profile *pf;
+ uint32_t fifo_size;
+ uint32_t fifo_regs;
+ uint32_t tx_start;
+ uint8_t x;
+
+ fifo_size = sc->sc_fifo_size;
+
+ fifo_regs = 4 * (sc->sc_dev_ep_max + sc->sc_dev_in_ep_max);
+
+ if (fifo_size >= fifo_regs)
+ fifo_size -= fifo_regs;
+ else
+ fifo_size = 0;
+
+ /* split equally for IN and OUT */
+ fifo_size /= 2;
+
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_GRXFSIZ, fifo_size / 4);
+
+ /* align to 4-bytes */
+ fifo_size &= ~3;
+
+ tx_start = fifo_size;
+
+ if (fifo_size < 0x40) {
+ DPRINTFN(-1, "Not enough data space for EP0 FIFO.\n");
+ USB_BUS_UNLOCK(&sc->sc_bus);
+ return (EINVAL);
+ }
+
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_GNPTXFSIZ, (0x10 << 16) | (tx_start / 4));
+ fifo_size -= 0x40;
+ tx_start += 0x40;
+
+ /* setup control endpoint profile */
+ sc->sc_hw_ep_profile[0].usb = dwc_otg_ep_profile[0];
+
+ for (x = 1; x != sc->sc_dev_ep_max; x++) {
+
+ pf = sc->sc_hw_ep_profile + x;
+
+ pf->usb.max_out_frame_size = 1024 * 3;
+ pf->usb.is_simplex = 0; /* assume duplex */
+ pf->usb.support_bulk = 1;
+ pf->usb.support_interrupt = 1;
+ pf->usb.support_isochronous = 1;
+ pf->usb.support_out = 1;
+
+ if (x < sc->sc_dev_in_ep_max) {
+ uint32_t limit;
+
+ limit = (x == 1) ? DWC_OTG_MAX_TXN :
+ (DWC_OTG_MAX_TXN / 2);
+
+ if (fifo_size >= limit) {
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_DIEPTXF(x),
+ ((limit / 4) << 16) |
+ (tx_start / 4));
+ tx_start += limit;
+ fifo_size -= limit;
+ pf->usb.max_in_frame_size = 0x200;
+ pf->usb.support_in = 1;
+ pf->max_buffer = limit;
+
+ } else if (fifo_size >= 0x80) {
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_DIEPTXF(x),
+ ((0x80 / 4) << 16) | (tx_start / 4));
+ tx_start += 0x80;
+ fifo_size -= 0x80;
+ pf->usb.max_in_frame_size = 0x40;
+ pf->usb.support_in = 1;
+
+ } else {
+ pf->usb.is_simplex = 1;
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_DIEPTXF(x),
+ (0x0 << 16) | (tx_start / 4));
+ }
+ } else {
+ pf->usb.is_simplex = 1;
+ }
+
+ DPRINTF("FIFO%d = IN:%d / OUT:%d\n", x,
+ pf->usb.max_in_frame_size,
+ pf->usb.max_out_frame_size);
+ }
+
+ /* reset RX FIFO */
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_GRSTCTL,
+ DWC_OTG_MSK_GRSTCTL_RXFFLUSH);
+
+ /* reset all TX FIFOs */
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_GRSTCTL,
+ DWC_OTG_MSK_GRSTCTL_TXFIFO(0x10) |
+ DWC_OTG_MSK_GRSTCTL_TXFFLUSH);
+
+ return (0);
+}
+
+static void
+dwc_otg_clocks_on(struct dwc_otg_softc *sc)
+{
+ if (sc->sc_flags.clocks_off &&
+ sc->sc_flags.port_powered) {
+
+ DPRINTFN(5, "\n");
+
+ /* TODO - platform specific */
+
+ sc->sc_flags.clocks_off = 0;
+ }
+}
+
+static void
+dwc_otg_clocks_off(struct dwc_otg_softc *sc)
+{
+ if (!sc->sc_flags.clocks_off) {
+
+ DPRINTFN(5, "\n");
+
+ /* TODO - platform specific */
+
+ sc->sc_flags.clocks_off = 1;
+ }
+}
+
+static void
+dwc_otg_pull_up(struct dwc_otg_softc *sc)
+{
+ uint32_t temp;
+
+ /* pullup D+, if possible */
+
+ if (!sc->sc_flags.d_pulled_up &&
+ sc->sc_flags.port_powered) {
+ sc->sc_flags.d_pulled_up = 1;
+
+ temp = DWC_OTG_READ_4(sc, DWC_OTG_REG_DCTL);
+ temp &= ~DWC_OTG_MSK_DCTL_SOFT_DISC;
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_DCTL, temp);
+ }
+}
+
+static void
+dwc_otg_pull_down(struct dwc_otg_softc *sc)
+{
+ uint32_t temp;
+
+ /* pulldown D+, if possible */
+
+ if (sc->sc_flags.d_pulled_up) {
+ sc->sc_flags.d_pulled_up = 0;
+
+ temp = DWC_OTG_READ_4(sc, DWC_OTG_REG_DCTL);
+ temp |= DWC_OTG_MSK_DCTL_SOFT_DISC;
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_DCTL, temp);
+ }
+}
+
+static void
+dwc_otg_resume_irq(struct dwc_otg_softc *sc)
+{
+ if (sc->sc_flags.status_suspend) {
+ /* update status bits */
+ sc->sc_flags.status_suspend = 0;
+ sc->sc_flags.change_suspend = 1;
+
+ /*
+ * Disable resume interrupt and enable suspend
+ * interrupt:
+ */
+ sc->sc_irq_mask &= ~DWC_OTG_MSK_GINT_WKUPINT;
+ sc->sc_irq_mask |= DWC_OTG_MSK_GINT_USB_SUSPEND;
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_GINTMSK, sc->sc_irq_mask);
+
+ /* complete root HUB interrupt endpoint */
+ dwc_otg_root_intr(sc);
+ }
+}
+
+static void
+dwc_otg_wakeup_peer(struct dwc_otg_softc *sc)
+{
+ uint32_t temp;
+
+ if (!sc->sc_flags.status_suspend)
+ return;
+
+ DPRINTFN(5, "Remote wakeup\n");
+
+ /* enable remote wakeup signalling */
+ temp = DWC_OTG_READ_4(sc, DWC_OTG_REG_DCTL);
+ temp |= DWC_OTG_MSK_DCTL_REMOTE_WAKEUP;
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_DCTL, temp);
+
+ /* Wait 8ms for remote wakeup to complete. */
+ usb_pause_mtx(&sc->sc_bus.bus_mtx, hz / 125);
+
+ temp &= ~DWC_OTG_MSK_DCTL_REMOTE_WAKEUP;
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_DCTL, temp);
+
+ /* need to fake resume IRQ */
+ dwc_otg_resume_irq(sc);
+}
+
+static void
+dwc_otg_set_address(struct dwc_otg_softc *sc, uint8_t addr)
+{
+ uint32_t temp;
+
+ DPRINTFN(5, "addr=%d\n", addr);
+
+ temp = DWC_OTG_READ_4(sc, DWC_OTG_REG_DCFG);
+ temp &= ~DWC_OTG_MSK_DCFG_SET_DEV_ADDR(0x7F);
+ temp |= DWC_OTG_MSK_DCFG_SET_DEV_ADDR(addr);
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_DCFG, temp);
+}
+
+static void
+dwc_otg_common_rx_ack(struct dwc_otg_softc *sc)
+{
+ DPRINTFN(5, "RX status clear\n");
+
+ /* enable RX FIFO level interrupt */
+ sc->sc_irq_mask |= DWC_OTG_MSK_GINT_RXFLVL;
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_GINTMSK, sc->sc_irq_mask);
+
+ /* clear cached status */
+ sc->sc_last_rx_status = 0;
+}
+
+static uint8_t
+dwc_otg_setup_rx(struct dwc_otg_td *td)
+{
+ struct dwc_otg_softc *sc;
+ struct usb_device_request req __aligned(4);
+ uint32_t temp;
+ uint16_t count;
+
+ /* get pointer to softc */
+ sc = DWC_OTG_PC2SC(td->pc);
+
+ /* check endpoint status */
+
+ if (sc->sc_last_rx_status == 0)
+ goto not_complete;
+
+ if (DWC_OTG_MSK_GRXSTS_GET_CHANNEL(sc->sc_last_rx_status) != 0)
+ goto not_complete;
+
+ if ((sc->sc_last_rx_status & DWC_OTG_MSK_GRXSTS_PID) !=
+ DWC_OTG_MSK_GRXSTS_PID_DATA0) {
+ /* release FIFO */
+ dwc_otg_common_rx_ack(sc);
+ goto not_complete;
+ }
+
+ if ((sc->sc_last_rx_status & DWC_OTG_MSK_GRXSTS_PACKET_STS) !=
+ DWC_OTG_MSK_GRXSTS_DEV_STP_DATA) {
+ /* release FIFO */
+ dwc_otg_common_rx_ack(sc);
+ goto not_complete;
+ }
+
+ DPRINTFN(5, "GRXSTSR=0x%08x\n", sc->sc_last_rx_status);
+
+ /* clear did stall */
+ td->did_stall = 0;
+
+ /* get the packet byte count */
+ count = DWC_OTG_MSK_GRXSTS_GET_BYTE_CNT(sc->sc_last_rx_status);
+
+ /* verify data length */
+ if (count != td->remainder) {
+ DPRINTFN(0, "Invalid SETUP packet "
+ "length, %d bytes\n", count);
+ /* release FIFO */
+ dwc_otg_common_rx_ack(sc);
+ goto not_complete;
+ }
+ if (count != sizeof(req)) {
+ DPRINTFN(0, "Unsupported SETUP packet "
+ "length, %d bytes\n", count);
+ /* release FIFO */
+ dwc_otg_common_rx_ack(sc);
+ goto not_complete;
+ }
+
+ /* copy in control request */
+ memcpy(&req, sc->sc_rx_bounce_buffer, sizeof(req));
+
+ /* copy data into real buffer */
+ usbd_copy_in(td->pc, 0, &req, sizeof(req));
+
+ td->offset = sizeof(req);
+ td->remainder = 0;
+
+ /* sneak peek the set address */
+ if ((req.bmRequestType == UT_WRITE_DEVICE) &&
+ (req.bRequest == UR_SET_ADDRESS)) {
+ /* must write address before ZLP */
+ dwc_otg_set_address(sc, req.wValue[0] & 0x7F);
+ }
+
+ /* don't send any data by default */
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_DIEPTSIZ(0),
+ DWC_OTG_MSK_DXEPTSIZ_SET_NPKT(0) |
+ DWC_OTG_MSK_DXEPTSIZ_SET_NBYTES(0));
+
+ temp = sc->sc_in_ctl[0];
+
+ /* enable IN endpoint */
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_DIEPCTL(0),
+ temp | DWC_OTG_MSK_DIEPCTL_ENABLE);
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_DIEPCTL(0),
+ temp | DWC_OTG_MSK_DIEPCTL_SET_NAK);
+
+ /* reset IN endpoint buffer */
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_GRSTCTL,
+ DWC_OTG_MSK_GRSTCTL_TXFIFO(0) |
+ DWC_OTG_MSK_GRSTCTL_TXFFLUSH);
+
+ /* acknowledge RX status */
+ dwc_otg_common_rx_ack(sc);
+ return (0); /* complete */
+
+not_complete:
+ /* abort any ongoing transfer, before enabling again */
+
+ temp = sc->sc_out_ctl[0];
+
+ temp |= DWC_OTG_MSK_DOEPCTL_ENABLE |
+ DWC_OTG_MSK_DOEPCTL_SET_NAK;
+
+ /* enable OUT endpoint */
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_DOEPCTL(0), temp);
+
+ if (!td->did_stall) {
+ td->did_stall = 1;
+
+ DPRINTFN(5, "stalling IN and OUT direction\n");
+
+ /* set stall after enabling endpoint */
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_DOEPCTL(0),
+ temp | DWC_OTG_MSK_DOEPCTL_STALL);
+
+ temp = sc->sc_in_ctl[0];
+
+ /* set stall assuming endpoint is enabled */
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_DIEPCTL(0),
+ temp | DWC_OTG_MSK_DIEPCTL_STALL);
+ }
+
+ /* setup number of buffers to receive */
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_DOEPTSIZ(0),
+ DWC_OTG_MSK_DXEPTSIZ_SET_MULTI(3) |
+ DWC_OTG_MSK_DXEPTSIZ_SET_NPKT(1) |
+ DWC_OTG_MSK_DXEPTSIZ_SET_NBYTES(sizeof(req)));
+
+ return (1); /* not complete */
+}
+
+static uint8_t
+dwc_otg_data_rx(struct dwc_otg_td *td)
+{
+ struct dwc_otg_softc *sc;
+ uint32_t temp;
+ uint16_t count;
+ uint8_t got_short;
+
+ got_short = 0;
+
+ /* get pointer to softc */
+ sc = DWC_OTG_PC2SC(td->pc);
+
+ /* check endpoint status */
+ if (sc->sc_last_rx_status == 0)
+ goto not_complete;
+
+ if (DWC_OTG_MSK_GRXSTS_GET_CHANNEL(sc->sc_last_rx_status) != td->ep_no)
+ goto not_complete;
+
+ /* check for SETUP packet */
+ if ((sc->sc_last_rx_status & DWC_OTG_MSK_GRXSTS_PACKET_STS) ==
+ DWC_OTG_MSK_GRXSTS_DEV_STP_DATA) {
+ if (td->remainder == 0) {
+ /*
+ * We are actually complete and have
+ * received the next SETUP
+ */
+ DPRINTFN(5, "faking complete\n");
+ return (0); /* complete */
+ }
+ /*
+ * USB Host Aborted the transfer.
+ */
+ td->error = 1;
+ return (0); /* complete */
+ }
+
+ if ((sc->sc_last_rx_status & DWC_OTG_MSK_GRXSTS_PACKET_STS) !=
+ DWC_OTG_MSK_GRXSTS_DEV_OUT_DATA) {
+ /* release FIFO */
+ dwc_otg_common_rx_ack(sc);
+ goto not_complete;
+ }
+
+ /* get the packet byte count */
+ count = DWC_OTG_MSK_GRXSTS_GET_BYTE_CNT(sc->sc_last_rx_status);
+
+ /* verify the packet byte count */
+ if (count != td->max_packet_size) {
+ if (count < td->max_packet_size) {
+ /* we have a short packet */
+ td->short_pkt = 1;
+ got_short = 1;
+ } else {
+ /* invalid USB packet */
+ td->error = 1;
+
+ /* release FIFO */
+ dwc_otg_common_rx_ack(sc);
+ return (0); /* we are complete */
+ }
+ }
+ /* verify the packet byte count */
+ if (count > td->remainder) {
+ /* invalid USB packet */
+ td->error = 1;
+
+ /* release FIFO */
+ dwc_otg_common_rx_ack(sc);
+ return (0); /* we are complete */
+ }
+
+ usbd_copy_in(td->pc, td->offset, sc->sc_rx_bounce_buffer, count);
+ td->remainder -= count;
+ td->offset += count;
+
+ /* release FIFO */
+ dwc_otg_common_rx_ack(sc);
+
+ /* check if we are complete */
+ if ((td->remainder == 0) || got_short) {
+ if (td->short_pkt) {
+ /* we are complete */
+ return (0);
+ }
+ /* else need to receive a zero length packet */
+ }
+
+not_complete:
+
+ temp = sc->sc_out_ctl[td->ep_no];
+
+ temp |= DWC_OTG_MSK_DOEPCTL_ENABLE |
+ DWC_OTG_MSK_DOEPCTL_CLR_NAK;
+
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_DOEPCTL(td->ep_no), temp);
+
+ /* enable SETUP and transfer complete interrupt */
+ if (td->ep_no == 0) {
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_DOEPTSIZ(0),
+ DWC_OTG_MSK_DXEPTSIZ_SET_NPKT(1) |
+ DWC_OTG_MSK_DXEPTSIZ_SET_NBYTES(td->max_packet_size));
+ } else {
+ /* allow reception of multiple packets */
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_DOEPTSIZ(td->ep_no),
+ DWC_OTG_MSK_DXEPTSIZ_SET_MULTI(1) |
+ DWC_OTG_MSK_DXEPTSIZ_SET_NPKT(4) |
+ DWC_OTG_MSK_DXEPTSIZ_SET_NBYTES(4 *
+ ((td->max_packet_size + 3) & ~3)));
+ }
+ return (1); /* not complete */
+}
+
+static uint8_t
+dwc_otg_data_tx(struct dwc_otg_td *td)
+{
+ struct dwc_otg_softc *sc;
+ uint32_t max_buffer;
+ uint32_t count;
+ uint32_t fifo_left;
+ uint32_t mpkt;
+ uint32_t temp;
+ uint8_t to;
+
+ to = 3; /* don't loop forever! */
+
+ /* get pointer to softc */
+ sc = DWC_OTG_PC2SC(td->pc);
+
+ max_buffer = sc->sc_hw_ep_profile[td->ep_no].max_buffer;
+
+repeat:
+ /* check for for endpoint 0 data */
+
+ temp = sc->sc_last_rx_status;
+
+ if ((td->ep_no == 0) && (temp != 0) &&
+ (DWC_OTG_MSK_GRXSTS_GET_CHANNEL(temp) == 0)) {
+
+ if ((temp & DWC_OTG_MSK_GRXSTS_PACKET_STS) !=
+ DWC_OTG_MSK_GRXSTS_DEV_STP_DATA) {
+
+ /* dump data - wrong direction */
+ dwc_otg_common_rx_ack(sc);
+ } else {
+ /*
+ * The current transfer was cancelled
+ * by the USB Host:
+ */
+ td->error = 1;
+ return (0); /* complete */
+ }
+ }
+
+ /* fill in more TX data, if possible */
+ if (td->tx_bytes != 0) {
+
+ uint16_t cpkt;
+
+ /* check if packets have been transferred */
+ temp = DWC_OTG_READ_4(sc, DWC_OTG_REG_DIEPTSIZ(td->ep_no));
+
+ /* get current packet number */
+ cpkt = DWC_OTG_MSK_DXEPTSIZ_GET_NPKT(temp);
+
+ if (cpkt >= td->npkt) {
+ fifo_left = 0;
+ } else {
+ if (max_buffer != 0) {
+ fifo_left = (td->npkt - cpkt) *
+ td->max_packet_size;
+
+ if (fifo_left > max_buffer)
+ fifo_left = max_buffer;
+ } else {
+ fifo_left = td->max_packet_size;
+ }
+ }
+
+ count = td->tx_bytes;
+ if (count > fifo_left)
+ count = fifo_left;
+
+ if (count != 0) {
+
+ /* clear topmost word before copy */
+ sc->sc_tx_bounce_buffer[(count - 1) / 4] = 0;
+
+ /* copy out data */
+ usbd_copy_out(td->pc, td->offset,
+ sc->sc_tx_bounce_buffer, count);
+
+ /* transfer data into FIFO */
+ bus_space_write_region_4(sc->sc_io_tag, sc->sc_io_hdl,
+ DWC_OTG_REG_DFIFO(td->ep_no),
+ sc->sc_tx_bounce_buffer, (count + 3) / 4);
+
+ td->tx_bytes -= count;
+ td->remainder -= count;
+ td->offset += count;
+ td->npkt = cpkt;
+ }
+ if (td->tx_bytes != 0)
+ goto not_complete;
+
+ /* check remainder */
+ if (td->remainder == 0) {
+ if (td->short_pkt)
+ return (0); /* complete */
+
+ /* else we need to transmit a short packet */
+ }
+ }
+
+ /* check if no packets have been transferred */
+ temp = DWC_OTG_READ_4(sc, DWC_OTG_REG_DIEPTSIZ(td->ep_no));
+
+ if (DWC_OTG_MSK_DXEPTSIZ_GET_NPKT(temp) != 0) {
+
+ DPRINTFN(5, "busy ep=%d npkt=%d DIEPTSIZ=0x%08x "
+ "DIEPCTL=0x%08x\n", td->ep_no,
+ DWC_OTG_MSK_DXEPTSIZ_GET_NPKT(temp),
+ temp, DWC_OTG_READ_4(sc, DWC_OTG_REG_DIEPCTL(td->ep_no)));
+
+ goto not_complete;
+ }
+
+ DPRINTFN(5, "rem=%u ep=%d\n", td->remainder, td->ep_no);
+
+ /* try to optimise by sending more data */
+ if ((max_buffer != 0) && ((td->max_packet_size & 3) == 0)) {
+
+ /* send multiple packets at the same time */
+ mpkt = max_buffer / td->max_packet_size;
+
+ if (mpkt > 0x3FE)
+ mpkt = 0x3FE;
+
+ count = td->remainder;
+ if (count > 0x7FFFFF)
+ count = 0x7FFFFF - (0x7FFFFF % td->max_packet_size);
+
+ td->npkt = count / td->max_packet_size;
+
+ /*
+ * NOTE: We could use 0x3FE instead of "mpkt" in the
+ * check below to get more throughput, but then we
+ * have a dependency towards non-generic chip features
+ * to disable the TX-FIFO-EMPTY interrupts on a per
+ * endpoint basis. Increase the maximum buffer size of
+ * the IN endpoint to increase the performance.
+ */
+ if (td->npkt > mpkt) {
+ td->npkt = mpkt;
+ count = td->max_packet_size * mpkt;
+ } else if ((count == 0) || (count % td->max_packet_size)) {
+ /* we are transmitting a short packet */
+ td->npkt++;
+ td->short_pkt = 1;
+ }
+ } else {
+ /* send one packet at a time */
+ mpkt = 1;
+ count = td->max_packet_size;
+ if (td->remainder < count) {
+ /* we have a short packet */
+ td->short_pkt = 1;
+ count = td->remainder;
+ }
+ td->npkt = 1;
+ }
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_DIEPTSIZ(td->ep_no),
+ DWC_OTG_MSK_DXEPTSIZ_SET_MULTI(1) |
+ DWC_OTG_MSK_DXEPTSIZ_SET_NPKT(td->npkt) |
+ DWC_OTG_MSK_DXEPTSIZ_SET_NBYTES(count));
+
+ /* make room for buffering */
+ td->npkt += mpkt;
+
+ temp = sc->sc_in_ctl[td->ep_no];
+
+ /* must enable before writing data to FIFO */
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_DIEPCTL(td->ep_no), temp |
+ DWC_OTG_MSK_DIEPCTL_ENABLE |
+ DWC_OTG_MSK_DIEPCTL_CLR_NAK);
+
+ td->tx_bytes = count;
+
+ /* check remainder */
+ if (td->tx_bytes == 0 &&
+ td->remainder == 0) {
+ if (td->short_pkt)
+ return (0); /* complete */
+
+ /* else we need to transmit a short packet */
+ }
+
+ if (--to)
+ goto repeat;
+
+not_complete:
+ return (1); /* not complete */
+}
+
+static uint8_t
+dwc_otg_data_tx_sync(struct dwc_otg_td *td)
+{
+ struct dwc_otg_softc *sc;
+ uint32_t temp;
+
+ /* get pointer to softc */
+ sc = DWC_OTG_PC2SC(td->pc);
+
+ /*
+ * If all packets are transferred we are complete:
+ */
+ temp = DWC_OTG_READ_4(sc, DWC_OTG_REG_DIEPTSIZ(td->ep_no));
+
+ /* check that all packets have been transferred */
+ if (DWC_OTG_MSK_DXEPTSIZ_GET_NPKT(temp) != 0) {
+ DPRINTFN(5, "busy ep=%d\n", td->ep_no);
+ goto not_complete;
+ }
+ return (0);
+
+not_complete:
+
+ /* we only want to know if there is a SETUP packet or free IN packet */
+
+ temp = sc->sc_last_rx_status;
+
+ if ((td->ep_no == 0) && (temp != 0) &&
+ (DWC_OTG_MSK_GRXSTS_GET_CHANNEL(temp) == 0)) {
+
+ if ((temp & DWC_OTG_MSK_GRXSTS_PACKET_STS) ==
+ DWC_OTG_MSK_GRXSTS_DEV_STP_DATA) {
+ DPRINTFN(5, "faking complete\n");
+ /*
+ * Race condition: We are complete!
+ */
+ return (0);
+ } else {
+ /* dump data - wrong direction */
+ dwc_otg_common_rx_ack(sc);
+ }
+ }
+ return (1); /* not complete */
+}
+
+static uint8_t
+dwc_otg_xfer_do_fifo(struct usb_xfer *xfer)
+{
+ struct dwc_otg_td *td;
+
+ DPRINTFN(9, "\n");
+
+ td = xfer->td_transfer_cache;
+ while (1) {
+ if ((td->func) (td)) {
+ /* operation in progress */
+ break;
+ }
+ if (((void *)td) == xfer->td_transfer_last) {
+ goto done;
+ }
+ if (td->error) {
+ goto done;
+ } else if (td->remainder > 0) {
+ /*
+ * We had a short transfer. If there is no alternate
+ * next, stop processing !
+ */
+ if (!td->alt_next)
+ goto done;
+ }
+
+ /*
+ * Fetch the next transfer descriptor and transfer
+ * some flags to the next transfer descriptor
+ */
+ td = td->obj_next;
+ xfer->td_transfer_cache = td;
+ }
+ return (1); /* not complete */
+
+done:
+ /* compute all actual lengths */
+
+ dwc_otg_standard_done(xfer);
+ return (0); /* complete */
+}
+
+static void
+dwc_otg_interrupt_poll(struct dwc_otg_softc *sc)
+{
+ struct usb_xfer *xfer;
+ uint32_t temp;
+ uint8_t got_rx_status;
+
+repeat:
+ if (sc->sc_last_rx_status == 0) {
+
+ temp = DWC_OTG_READ_4(sc, DWC_OTG_REG_GINTSTS);
+ if (temp & DWC_OTG_MSK_GINT_RXFLVL) {
+ /* pop current status */
+ sc->sc_last_rx_status =
+ DWC_OTG_READ_4(sc, DWC_OTG_REG_GRXSTSP);
+ }
+
+ if (sc->sc_last_rx_status != 0) {
+
+ uint32_t temp;
+ uint8_t ep_no;
+
+ temp = DWC_OTG_MSK_GRXSTS_GET_BYTE_CNT(
+ sc->sc_last_rx_status);
+ ep_no = DWC_OTG_MSK_GRXSTS_GET_CHANNEL(
+ sc->sc_last_rx_status);
+
+ /* receive data, if any */
+ if (temp != 0) {
+ DPRINTF("Reading %d bytes from ep %d\n", temp, ep_no);
+ bus_space_read_region_4(sc->sc_io_tag, sc->sc_io_hdl,
+ DWC_OTG_REG_DFIFO(ep_no),
+ sc->sc_rx_bounce_buffer, (temp + 3) / 4);
+ }
+
+ temp = sc->sc_last_rx_status &
+ DWC_OTG_MSK_GRXSTS_PACKET_STS;
+
+ /* non-data messages we simply skip */
+ if (temp != DWC_OTG_MSK_GRXSTS_DEV_STP_DATA &&
+ temp != DWC_OTG_MSK_GRXSTS_DEV_OUT_DATA) {
+ dwc_otg_common_rx_ack(sc);
+ goto repeat;
+ }
+
+ /* check if we should dump the data */
+ if (!(sc->sc_active_out_ep & (1U << ep_no))) {
+ dwc_otg_common_rx_ack(sc);
+ goto repeat;
+ }
+
+ got_rx_status = 1;
+
+ DPRINTFN(5, "RX status = 0x%08x: ch=%d pid=%d bytes=%d sts=%d\n",
+ sc->sc_last_rx_status, ep_no,
+ (sc->sc_last_rx_status >> 15) & 3,
+ DWC_OTG_MSK_GRXSTS_GET_BYTE_CNT(sc->sc_last_rx_status),
+ (sc->sc_last_rx_status >> 17) & 15);
+ } else {
+ got_rx_status = 0;
+ }
+ } else {
+ uint8_t ep_no;
+
+ ep_no = DWC_OTG_MSK_GRXSTS_GET_CHANNEL(
+ sc->sc_last_rx_status);
+
+ /* check if we should dump the data */
+ if (!(sc->sc_active_out_ep & (1U << ep_no))) {
+ dwc_otg_common_rx_ack(sc);
+ goto repeat;
+ }
+
+ got_rx_status = 1;
+ }
+
+ TAILQ_FOREACH(xfer, &sc->sc_bus.intr_q.head, wait_entry) {
+ if (!dwc_otg_xfer_do_fifo(xfer)) {
+ /* queue has been modified */
+ goto repeat;
+ }
+ }
+
+ if (got_rx_status) {
+ if (sc->sc_last_rx_status == 0)
+ goto repeat;
+
+ /* disable RX FIFO level interrupt */
+ sc->sc_irq_mask &= ~DWC_OTG_MSK_GINT_RXFLVL;
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_GINTMSK, sc->sc_irq_mask);
+ }
+}
+
+static void
+dwc_otg_vbus_interrupt(struct dwc_otg_softc *sc, uint8_t is_on)
+{
+ DPRINTFN(5, "vbus = %u\n", is_on);
+
+ if (is_on) {
+ if (!sc->sc_flags.status_vbus) {
+ sc->sc_flags.status_vbus = 1;
+
+ /* complete root HUB interrupt endpoint */
+
+ dwc_otg_root_intr(sc);
+ }
+ } else {
+ if (sc->sc_flags.status_vbus) {
+ sc->sc_flags.status_vbus = 0;
+ sc->sc_flags.status_bus_reset = 0;
+ sc->sc_flags.status_suspend = 0;
+ sc->sc_flags.change_suspend = 0;
+ sc->sc_flags.change_connect = 1;
+
+ /* complete root HUB interrupt endpoint */
+
+ dwc_otg_root_intr(sc);
+ }
+ }
+}
+
+void
+dwc_otg_interrupt(struct dwc_otg_softc *sc)
+{
+ uint32_t status;
+
+ USB_BUS_LOCK(&sc->sc_bus);
+
+ /* read and clear interrupt status */
+ status = DWC_OTG_READ_4(sc, DWC_OTG_REG_GINTSTS);
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_GINTSTS, status);
+
+ DPRINTFN(14, "GINTSTS=0x%08x\n", status);
+
+ /* check for any bus state change interrupts */
+ if (status & DWC_OTG_MSK_GINT_ENUM_DONE) {
+
+ uint32_t temp;
+
+ DPRINTFN(5, "end of reset\n");
+
+ /* set correct state */
+ sc->sc_flags.status_bus_reset = 1;
+ sc->sc_flags.status_suspend = 0;
+ sc->sc_flags.change_suspend = 0;
+ sc->sc_flags.change_connect = 1;
+
+ /* reset FIFOs */
+ dwc_otg_init_fifo(sc);
+
+ /* reset function address */
+ dwc_otg_set_address(sc, 0);
+
+ /* reset active endpoints */
+ sc->sc_active_out_ep = 1;
+
+ /* figure out enumeration speed */
+ temp = DWC_OTG_READ_4(sc, DWC_OTG_REG_DSTS);
+ if (DWC_OTG_MSK_DSTS_GET_ENUM_SPEED(temp) ==
+ DWC_OTG_MSK_DSTS_ENUM_SPEED_HI)
+ sc->sc_flags.status_high_speed = 1;
+ else
+ sc->sc_flags.status_high_speed = 0;
+
+ /* disable resume interrupt and enable suspend interrupt */
+
+ sc->sc_irq_mask &= ~DWC_OTG_MSK_GINT_WKUPINT;
+ sc->sc_irq_mask |= DWC_OTG_MSK_GINT_USB_SUSPEND;
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_GINTMSK, sc->sc_irq_mask);
+
+ /* complete root HUB interrupt endpoint */
+ dwc_otg_root_intr(sc);
+ }
+ /*
+ * If resume and suspend is set at the same time we interpret
+ * that like RESUME. Resume is set when there is at least 3
+ * milliseconds of inactivity on the USB BUS.
+ */
+ if (status & DWC_OTG_MSK_GINT_WKUPINT) {
+
+ DPRINTFN(5, "resume interrupt\n");
+
+ dwc_otg_resume_irq(sc);
+
+ } else if (status & DWC_OTG_MSK_GINT_USB_SUSPEND) {
+
+ DPRINTFN(5, "suspend interrupt\n");
+
+ if (!sc->sc_flags.status_suspend) {
+ /* update status bits */
+ sc->sc_flags.status_suspend = 1;
+ sc->sc_flags.change_suspend = 1;
+
+ /*
+ * Disable suspend interrupt and enable resume
+ * interrupt:
+ */
+ sc->sc_irq_mask &= ~DWC_OTG_MSK_GINT_USB_SUSPEND;
+ sc->sc_irq_mask |= DWC_OTG_MSK_GINT_WKUPINT;
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_GINTMSK, sc->sc_irq_mask);
+
+ /* complete root HUB interrupt endpoint */
+ dwc_otg_root_intr(sc);
+ }
+ }
+ /* check VBUS */
+ if (status & (DWC_OTG_MSK_GINT_USB_SUSPEND |
+ DWC_OTG_MSK_GINT_SESSREQINT)) {
+ uint32_t temp;
+
+ temp = DWC_OTG_READ_4(sc, DWC_OTG_REG_GOTGCTL);
+
+ DPRINTFN(5, "GOTGCTL=0x%08x\n", temp);
+
+ dwc_otg_vbus_interrupt(sc,
+ (temp & DWC_OTG_MSK_GOTGCTL_BSESS_VALID) ? 1 : 0);
+ }
+
+ /* clear all IN endpoint interrupts */
+ if (status & DWC_OTG_MSK_GINT_INEP) {
+ uint32_t temp;
+ uint8_t x;
+
+ for (x = 0; x != sc->sc_dev_in_ep_max; x++) {
+ temp = DWC_OTG_READ_4(sc, DWC_OTG_REG_DIEPINT(x));
+ if (temp == 0)
+ continue;
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_DIEPINT(x), temp);
+ }
+ }
+
+#if 0
+ /* check if we should poll the FIFOs */
+ if (status & (DWC_OTG_MSK_GINT_RXFLVL | DWC_OTG_MSK_GINT_INEP))
+#endif
+ /* poll FIFO(s) */
+ dwc_otg_interrupt_poll(sc);
+
+ USB_BUS_UNLOCK(&sc->sc_bus);
+}
+
+static void
+dwc_otg_setup_standard_chain_sub(struct dwc_otg_std_temp *temp)
+{
+ struct dwc_otg_td *td;
+
+ /* get current Transfer Descriptor */
+ td = temp->td_next;
+ temp->td = td;
+
+ /* prepare for next TD */
+ temp->td_next = td->obj_next;
+
+ /* fill out the Transfer Descriptor */
+ td->func = temp->func;
+ td->pc = temp->pc;
+ td->offset = temp->offset;
+ td->remainder = temp->len;
+ td->tx_bytes = 0;
+ td->error = 0;
+ td->npkt = 1;
+ td->did_stall = temp->did_stall;
+ td->short_pkt = temp->short_pkt;
+ td->alt_next = temp->setup_alt_next;
+}
+
+static void
+dwc_otg_setup_standard_chain(struct usb_xfer *xfer)
+{
+ struct dwc_otg_std_temp temp;
+ struct dwc_otg_td *td;
+ uint32_t x;
+ uint8_t need_sync;
+
+ DPRINTFN(9, "addr=%d endpt=%d sumlen=%d speed=%d\n",
+ xfer->address, UE_GET_ADDR(xfer->endpointno),
+ xfer->sumlen, usbd_get_speed(xfer->xroot->udev));
+
+ temp.max_frame_size = xfer->max_frame_size;
+
+ td = xfer->td_start[0];
+ xfer->td_transfer_first = td;
+ xfer->td_transfer_cache = td;
+
+ /* setup temp */
+
+ temp.pc = NULL;
+ temp.td = NULL;
+ temp.td_next = xfer->td_start[0];
+ temp.offset = 0;
+ temp.setup_alt_next = xfer->flags_int.short_frames_ok;
+ temp.did_stall = !xfer->flags_int.control_stall;
+
+ /* check if we should prepend a setup message */
+
+ if (xfer->flags_int.control_xfr) {
+ if (xfer->flags_int.control_hdr) {
+
+ temp.func = &dwc_otg_setup_rx;
+ temp.len = xfer->frlengths[0];
+ temp.pc = xfer->frbuffers + 0;
+ temp.short_pkt = temp.len ? 1 : 0;
+
+ /* check for last frame */
+ if (xfer->nframes == 1) {
+ /* no STATUS stage yet, SETUP is last */
+ if (xfer->flags_int.control_act)
+ temp.setup_alt_next = 0;
+ }
+
+ dwc_otg_setup_standard_chain_sub(&temp);
+ }
+ x = 1;
+ } else {
+ x = 0;
+ }
+
+ if (x != xfer->nframes) {
+ if (xfer->endpointno & UE_DIR_IN) {
+ temp.func = &dwc_otg_data_tx;
+ need_sync = 1;
+ } else {
+ temp.func = &dwc_otg_data_rx;
+ need_sync = 0;
+ }
+
+ /* setup "pc" pointer */
+ temp.pc = xfer->frbuffers + x;
+ } else {
+ need_sync = 0;
+ }
+ while (x != xfer->nframes) {
+
+ /* DATA0 / DATA1 message */
+
+ temp.len = xfer->frlengths[x];
+
+ x++;
+
+ if (x == xfer->nframes) {
+ if (xfer->flags_int.control_xfr) {
+ if (xfer->flags_int.control_act) {
+ temp.setup_alt_next = 0;
+ }
+ } else {
+ temp.setup_alt_next = 0;
+ }
+ }
+ if (temp.len == 0) {
+
+ /* make sure that we send an USB packet */
+
+ temp.short_pkt = 0;
+
+ } else {
+
+ /* regular data transfer */
+
+ temp.short_pkt = (xfer->flags.force_short_xfer ? 0 : 1);
+ }
+
+ dwc_otg_setup_standard_chain_sub(&temp);
+
+ if (xfer->flags_int.isochronous_xfr) {
+ temp.offset += temp.len;
+ } else {
+ /* get next Page Cache pointer */
+ temp.pc = xfer->frbuffers + x;
+ }
+ }
+
+ if (xfer->flags_int.control_xfr) {
+
+ /* always setup a valid "pc" pointer for status and sync */
+ temp.pc = xfer->frbuffers + 0;
+ temp.len = 0;
+ temp.short_pkt = 0;
+ temp.setup_alt_next = 0;
+
+ /* check if we need to sync */
+ if (need_sync) {
+ /* we need a SYNC point after TX */
+ temp.func = &dwc_otg_data_tx_sync;
+ dwc_otg_setup_standard_chain_sub(&temp);
+ }
+
+ /* check if we should append a status stage */
+ if (!xfer->flags_int.control_act) {
+
+ /*
+ * Send a DATA1 message and invert the current
+ * endpoint direction.
+ */
+ if (xfer->endpointno & UE_DIR_IN) {
+ temp.func = &dwc_otg_data_rx;
+ need_sync = 0;
+ } else {
+ temp.func = &dwc_otg_data_tx;
+ need_sync = 1;
+ }
+
+ dwc_otg_setup_standard_chain_sub(&temp);
+ if (need_sync) {
+ /* we need a SYNC point after TX */
+ temp.func = &dwc_otg_data_tx_sync;
+ dwc_otg_setup_standard_chain_sub(&temp);
+ }
+ }
+ } else {
+ /* check if we need to sync */
+ if (need_sync) {
+
+ temp.pc = xfer->frbuffers + 0;
+ temp.len = 0;
+ temp.short_pkt = 0;
+ temp.setup_alt_next = 0;
+
+ /* we need a SYNC point after TX */
+ temp.func = &dwc_otg_data_tx_sync;
+ dwc_otg_setup_standard_chain_sub(&temp);
+ }
+ }
+
+ /* must have at least one frame! */
+ td = temp.td;
+ xfer->td_transfer_last = td;
+}
+
+static void
+dwc_otg_timeout(void *arg)
+{
+ struct usb_xfer *xfer = arg;
+
+ DPRINTF("xfer=%p\n", xfer);
+
+ USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED);
+
+ /* transfer is transferred */
+ dwc_otg_device_done(xfer, USB_ERR_TIMEOUT);
+}
+
+static void
+dwc_otg_start_standard_chain(struct usb_xfer *xfer)
+{
+ DPRINTFN(9, "\n");
+
+ /* poll one time - will turn on interrupts */
+ if (dwc_otg_xfer_do_fifo(xfer)) {
+
+ /* put transfer on interrupt queue */
+ usbd_transfer_enqueue(&xfer->xroot->bus->intr_q, xfer);
+
+ /* start timeout, if any */
+ if (xfer->timeout != 0) {
+ usbd_transfer_timeout_ms(xfer,
+ &dwc_otg_timeout, xfer->timeout);
+ }
+ }
+}
+
+static void
+dwc_otg_root_intr(struct dwc_otg_softc *sc)
+{
+ DPRINTFN(9, "\n");
+
+ USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
+
+ /* set port bit */
+ sc->sc_hub_idata[0] = 0x02; /* we only have one port */
+
+ uhub_root_intr(&sc->sc_bus, sc->sc_hub_idata,
+ sizeof(sc->sc_hub_idata));
+}
+
+static usb_error_t
+dwc_otg_standard_done_sub(struct usb_xfer *xfer)
+{
+ struct dwc_otg_td *td;
+ uint32_t len;
+ uint8_t error;
+
+ DPRINTFN(9, "\n");
+
+ td = xfer->td_transfer_cache;
+
+ do {
+ len = td->remainder;
+
+ if (xfer->aframes != xfer->nframes) {
+ /*
+ * Verify the length and subtract
+ * the remainder from "frlengths[]":
+ */
+ if (len > xfer->frlengths[xfer->aframes]) {
+ td->error = 1;
+ } else {
+ xfer->frlengths[xfer->aframes] -= len;
+ }
+ }
+ /* Check for transfer error */
+ if (td->error) {
+ /* the transfer is finished */
+ error = 1;
+ td = NULL;
+ break;
+ }
+ /* Check for short transfer */
+ if (len > 0) {
+ if (xfer->flags_int.short_frames_ok) {
+ /* follow alt next */
+ if (td->alt_next) {
+ td = td->obj_next;
+ } else {
+ td = NULL;
+ }
+ } else {
+ /* the transfer is finished */
+ td = NULL;
+ }
+ error = 0;
+ break;
+ }
+ td = td->obj_next;
+
+ /* this USB frame is complete */
+ error = 0;
+ break;
+
+ } while (0);
+
+ /* update transfer cache */
+
+ xfer->td_transfer_cache = td;
+
+ return (error ?
+ USB_ERR_STALLED : USB_ERR_NORMAL_COMPLETION);
+}
+
+static void
+dwc_otg_standard_done(struct usb_xfer *xfer)
+{
+ usb_error_t err = 0;
+
+ DPRINTFN(13, "xfer=%p endpoint=%p transfer done\n",
+ xfer, xfer->endpoint);
+
+ /* reset scanner */
+
+ xfer->td_transfer_cache = xfer->td_transfer_first;
+
+ if (xfer->flags_int.control_xfr) {
+
+ if (xfer->flags_int.control_hdr) {
+
+ err = dwc_otg_standard_done_sub(xfer);
+ }
+ xfer->aframes = 1;
+
+ if (xfer->td_transfer_cache == NULL) {
+ goto done;
+ }
+ }
+ while (xfer->aframes != xfer->nframes) {
+
+ err = dwc_otg_standard_done_sub(xfer);
+ xfer->aframes++;
+
+ if (xfer->td_transfer_cache == NULL) {
+ goto done;
+ }
+ }
+
+ if (xfer->flags_int.control_xfr &&
+ !xfer->flags_int.control_act) {
+
+ err = dwc_otg_standard_done_sub(xfer);
+ }
+done:
+ dwc_otg_device_done(xfer, err);
+}
+
+/*------------------------------------------------------------------------*
+ * dwc_otg_device_done
+ *
+ * NOTE: this function can be called more than one time on the
+ * same USB transfer!
+ *------------------------------------------------------------------------*/
+static void
+dwc_otg_device_done(struct usb_xfer *xfer, usb_error_t error)
+{
+ DPRINTFN(9, "xfer=%p, endpoint=%p, error=%d\n",
+ xfer, xfer->endpoint, error);
+
+ if (xfer->flags_int.usb_mode == USB_MODE_DEVICE) {
+ DPRINTFN(15, "disabled interrupts!\n");
+ }
+ /* dequeue transfer and start next transfer */
+ usbd_transfer_done(xfer, error);
+}
+
+static void
+dwc_otg_set_stall(struct usb_device *udev, struct usb_xfer *xfer,
+ struct usb_endpoint *ep, uint8_t *did_stall)
+{
+ struct dwc_otg_softc *sc;
+ uint32_t temp;
+ uint32_t reg;
+ uint8_t ep_no;
+
+ USB_BUS_LOCK_ASSERT(udev->bus, MA_OWNED);
+
+ if (xfer) {
+ /* cancel any ongoing transfers */
+ dwc_otg_device_done(xfer, USB_ERR_STALLED);
+ }
+ sc = DWC_OTG_BUS2SC(udev->bus);
+
+ /* get endpoint address */
+ ep_no = ep->edesc->bEndpointAddress;
+
+ DPRINTFN(5, "endpoint=0x%x\n", ep_no);
+
+ if (ep_no & UE_DIR_IN) {
+ reg = DWC_OTG_REG_DIEPCTL(ep_no & UE_ADDR);
+ temp = sc->sc_in_ctl[ep_no & UE_ADDR];
+ } else {
+ reg = DWC_OTG_REG_DOEPCTL(ep_no & UE_ADDR);
+ temp = sc->sc_out_ctl[ep_no & UE_ADDR];
+ }
+
+ /* disable and stall endpoint */
+ DWC_OTG_WRITE_4(sc, reg, temp | DWC_OTG_MSK_DOEPCTL_DISABLE);
+ DWC_OTG_WRITE_4(sc, reg, temp | DWC_OTG_MSK_DOEPCTL_STALL);
+
+ /* clear active OUT ep */
+ if (!(ep_no & UE_DIR_IN)) {
+
+ sc->sc_active_out_ep &= ~(1U << (ep_no & UE_ADDR));
+
+ if (sc->sc_last_rx_status != 0 &&
+ (ep_no & UE_ADDR) == DWC_OTG_MSK_GRXSTS_GET_CHANNEL(
+ sc->sc_last_rx_status)) {
+ /* dump data */
+ dwc_otg_common_rx_ack(sc);
+ /* poll interrupt */
+ dwc_otg_interrupt_poll(sc);
+ }
+ }
+}
+
+static void
+dwc_otg_clear_stall_sub(struct dwc_otg_softc *sc, uint32_t mps,
+ uint8_t ep_no, uint8_t ep_type, uint8_t ep_dir)
+{
+ uint32_t reg;
+ uint32_t temp;
+
+ if (ep_type == UE_CONTROL) {
+ /* clearing stall is not needed */
+ return;
+ }
+
+ if (ep_dir) {
+ reg = DWC_OTG_REG_DIEPCTL(ep_no);
+ } else {
+ reg = DWC_OTG_REG_DOEPCTL(ep_no);
+ sc->sc_active_out_ep |= (1U << ep_no);
+ }
+
+ /* round up and mask away the multiplier count */
+ mps = (mps + 3) & 0x7FC;
+
+ if (ep_type == UE_BULK) {
+ temp = DWC_OTG_MSK_EP_SET_TYPE(
+ DWC_OTG_MSK_EP_TYPE_BULK) |
+ DWC_OTG_MSK_DIEPCTL_USB_AEP;
+ } else if (ep_type == UE_INTERRUPT) {
+ temp = DWC_OTG_MSK_EP_SET_TYPE(
+ DWC_OTG_MSK_EP_TYPE_INTERRUPT) |
+ DWC_OTG_MSK_DIEPCTL_USB_AEP;
+ } else {
+ temp = DWC_OTG_MSK_EP_SET_TYPE(
+ DWC_OTG_MSK_EP_TYPE_ISOC) |
+ DWC_OTG_MSK_DIEPCTL_USB_AEP;
+ }
+
+ temp |= DWC_OTG_MSK_DIEPCTL_MPS(mps);
+ temp |= DWC_OTG_MSK_DIEPCTL_FNUM(ep_no);
+
+ if (ep_dir)
+ sc->sc_in_ctl[ep_no] = temp;
+ else
+ sc->sc_out_ctl[ep_no] = temp;
+
+ DWC_OTG_WRITE_4(sc, reg, temp | DWC_OTG_MSK_DOEPCTL_DISABLE);
+ DWC_OTG_WRITE_4(sc, reg, temp | DWC_OTG_MSK_DOEPCTL_SET_DATA0);
+ DWC_OTG_WRITE_4(sc, reg, temp | DWC_OTG_MSK_DIEPCTL_SET_NAK);
+
+ /* we only reset the transmit FIFO */
+ if (ep_dir) {
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_GRSTCTL,
+ DWC_OTG_MSK_GRSTCTL_TXFIFO(ep_no) |
+ DWC_OTG_MSK_GRSTCTL_TXFFLUSH);
+
+ DWC_OTG_WRITE_4(sc,
+ DWC_OTG_REG_DIEPTSIZ(ep_no), 0);
+ }
+
+ /* poll interrupt */
+ dwc_otg_interrupt_poll(sc);
+}
+
+static void
+dwc_otg_clear_stall(struct usb_device *udev, struct usb_endpoint *ep)
+{
+ struct dwc_otg_softc *sc;
+ struct usb_endpoint_descriptor *ed;
+
+ DPRINTFN(5, "endpoint=%p\n", ep);
+
+ USB_BUS_LOCK_ASSERT(udev->bus, MA_OWNED);
+
+ /* check mode */
+ if (udev->flags.usb_mode != USB_MODE_DEVICE) {
+ /* not supported */
+ return;
+ }
+ /* get softc */
+ sc = DWC_OTG_BUS2SC(udev->bus);
+
+ /* get endpoint descriptor */
+ ed = ep->edesc;
+
+ /* reset endpoint */
+ dwc_otg_clear_stall_sub(sc,
+ UGETW(ed->wMaxPacketSize),
+ (ed->bEndpointAddress & UE_ADDR),
+ (ed->bmAttributes & UE_XFERTYPE),
+ (ed->bEndpointAddress & (UE_DIR_IN | UE_DIR_OUT)));
+}
+
+static void
+dwc_otg_device_state_change(struct usb_device *udev)
+{
+ struct dwc_otg_softc *sc;
+ uint8_t x;
+
+ /* get softc */
+ sc = DWC_OTG_BUS2SC(udev->bus);
+
+ /* deactivate all other endpoint but the control endpoint */
+ if (udev->state == USB_STATE_CONFIGURED ||
+ udev->state == USB_STATE_ADDRESSED) {
+
+ USB_BUS_LOCK(&sc->sc_bus);
+
+ for (x = 1; x != sc->sc_dev_ep_max; x++) {
+
+ if (x < sc->sc_dev_in_ep_max) {
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_DIEPCTL(x),
+ DWC_OTG_MSK_DIEPCTL_DISABLE);
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_DIEPCTL(x), 0);
+ }
+
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_DOEPCTL(x),
+ DWC_OTG_MSK_DOEPCTL_DISABLE);
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_DOEPCTL(x), 0);
+ }
+ USB_BUS_UNLOCK(&sc->sc_bus);
+ }
+}
+
+int
+dwc_otg_init(struct dwc_otg_softc *sc)
+{
+ uint32_t temp;
+
+ DPRINTF("start\n");
+
+ /* set up the bus structure */
+ sc->sc_bus.usbrev = USB_REV_2_0;
+ sc->sc_bus.methods = &dwc_otg_bus_methods;
+
+ /* reset active endpoints */
+ sc->sc_active_out_ep = 1;
+
+ USB_BUS_LOCK(&sc->sc_bus);
+
+ /* turn on clocks */
+ dwc_otg_clocks_on(sc);
+
+ temp = DWC_OTG_READ_4(sc, DWC_OTG_REG_GSNPSID);
+ DPRINTF("Version = 0x%08x\n", temp);
+
+ /* disconnect */
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_DCTL,
+ DWC_OTG_MSK_DCTL_SOFT_DISC);
+
+ /* wait for host to detect disconnect */
+ usb_pause_mtx(&sc->sc_bus.bus_mtx, hz / 32);
+
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_GRSTCTL,
+ DWC_OTG_MSK_GRSTCTL_CSFTRST);
+
+ /* wait a little bit for block to reset */
+ usb_pause_mtx(&sc->sc_bus.bus_mtx, hz / 128);
+
+ /* select HSIC or non-HSIC mode */
+ if (DWC_OTG_USE_HSIC) {
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_GUSBCFG,
+ DWC_OTG_MSK_GUSBCFG_PHY_INTF |
+ DWC_OTG_MSK_GUSBCFG_TRD_TIM(5));
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_GOTGCTL,
+ 0x000000EC);
+
+ temp = DWC_OTG_READ_4(sc, DWC_OTG_REG_GLPMCFG);
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_GLPMCFG,
+ temp & ~DWC_OTG_MSK_GLPMCFG_HSIC_CONN);
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_GLPMCFG,
+ temp | DWC_OTG_MSK_GLPMCFG_HSIC_CONN);
+ } else {
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_GUSBCFG,
+ DWC_OTG_MSK_GUSBCFG_ULPI_UMTI_SEL |
+ DWC_OTG_MSK_GUSBCFG_TRD_TIM(5));
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_GOTGCTL, 0);
+
+ temp = DWC_OTG_READ_4(sc, DWC_OTG_REG_GLPMCFG);
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_GLPMCFG,
+ temp & ~DWC_OTG_MSK_GLPMCFG_HSIC_CONN);
+ }
+
+ /* clear global nak */
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_DCTL,
+ DWC_OTG_MSK_DCTL_CGOUT_NAK |
+ DWC_OTG_MSK_DCTL_CGNPIN_NAK);
+
+ /* enable USB port */
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_PCGCCTL, 0);
+
+ /* pull up D+ */
+ dwc_otg_pull_up(sc);
+
+ temp = DWC_OTG_READ_4(sc, DWC_OTG_REG_GHWCFG3);
+
+ sc->sc_fifo_size = 4 * DWC_OTG_MSK_GHWCFG3_GET_DFIFO(temp);
+
+ temp = DWC_OTG_READ_4(sc, DWC_OTG_REG_GHWCFG2);
+
+ sc->sc_dev_ep_max = DWC_OTG_MSK_GHWCFG2_NUM_DEV_EP(temp);
+
+ temp = DWC_OTG_READ_4(sc, DWC_OTG_REG_GHWCFG4);
+
+ sc->sc_dev_in_ep_max = DWC_OTG_MSK_GHWCFG4_NUM_IN_EPS(temp);
+
+ DPRINTF("Total FIFO size = %d bytes, Device EPs = %d/%d\n",
+ sc->sc_fifo_size, sc->sc_dev_ep_max, sc->sc_dev_in_ep_max);
+
+ /* setup FIFO */
+ if (dwc_otg_init_fifo(sc))
+ return (EINVAL);
+
+ /* enable interrupts */
+ sc->sc_irq_mask = DWC_OTG_MSK_GINT_ENABLED;
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_GINTMSK, sc->sc_irq_mask);
+
+ /*
+ * Disable all endpoint interrupts,
+ * we use the SOF IRQ for transmit:
+ */
+
+ /* enable all endpoint interrupts */
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_DIEPMSK,
+ /* DWC_OTG_MSK_DIEP_FIFO_EMPTY | */
+ DWC_OTG_MSK_DIEP_XFER_COMPLETE);
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_DOEPMSK, 0);
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_DAINTMSK, 0xFFFF);
+
+ /* enable global IRQ */
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_GAHBCFG,
+ DWC_OTG_MSK_GAHBCFG_GLOBAL_IRQ);
+
+ /* turn off clocks */
+ dwc_otg_clocks_off(sc);
+
+ /* read initial VBUS state */
+
+ temp = DWC_OTG_READ_4(sc, DWC_OTG_REG_GOTGCTL);
+
+ DPRINTFN(5, "GOTCTL=0x%08x\n", temp);
+
+ dwc_otg_vbus_interrupt(sc,
+ (temp & DWC_OTG_MSK_GOTGCTL_BSESS_VALID) ? 1 : 0);
+
+ USB_BUS_UNLOCK(&sc->sc_bus);
+
+ /* catch any lost interrupts */
+
+ dwc_otg_do_poll(&sc->sc_bus);
+
+ return (0); /* success */
+}
+
+void
+dwc_otg_uninit(struct dwc_otg_softc *sc)
+{
+ USB_BUS_LOCK(&sc->sc_bus);
+
+ /* set disconnect */
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_DCTL,
+ DWC_OTG_MSK_DCTL_SOFT_DISC);
+
+ /* turn off global IRQ */
+ DWC_OTG_WRITE_4(sc, DWC_OTG_REG_GAHBCFG, 0);
+
+ sc->sc_flags.port_powered = 0;
+ sc->sc_flags.status_vbus = 0;
+ sc->sc_flags.status_bus_reset = 0;
+ sc->sc_flags.status_suspend = 0;
+ sc->sc_flags.change_suspend = 0;
+ sc->sc_flags.change_connect = 1;
+
+ dwc_otg_pull_down(sc);
+ dwc_otg_clocks_off(sc);
+
+ USB_BUS_UNLOCK(&sc->sc_bus);
+}
+
+static void
+dwc_otg_suspend(struct dwc_otg_softc *sc)
+{
+ return;
+}
+
+static void
+dwc_otg_resume(struct dwc_otg_softc *sc)
+{
+ return;
+}
+
+static void
+dwc_otg_do_poll(struct usb_bus *bus)
+{
+ struct dwc_otg_softc *sc = DWC_OTG_BUS2SC(bus);
+
+ USB_BUS_LOCK(&sc->sc_bus);
+ dwc_otg_interrupt_poll(sc);
+ USB_BUS_UNLOCK(&sc->sc_bus);
+}
+
+/*------------------------------------------------------------------------*
+ * at91dci bulk support
+ * at91dci control support
+ * at91dci interrupt support
+ *------------------------------------------------------------------------*/
+static void
+dwc_otg_device_non_isoc_open(struct usb_xfer *xfer)
+{
+ return;
+}
+
+static void
+dwc_otg_device_non_isoc_close(struct usb_xfer *xfer)
+{
+ dwc_otg_device_done(xfer, USB_ERR_CANCELLED);
+}
+
+static void
+dwc_otg_device_non_isoc_enter(struct usb_xfer *xfer)
+{
+ return;
+}
+
+static void
+dwc_otg_device_non_isoc_start(struct usb_xfer *xfer)
+{
+ /* setup TDs */
+ dwc_otg_setup_standard_chain(xfer);
+ dwc_otg_start_standard_chain(xfer);
+}
+
+struct usb_pipe_methods dwc_otg_device_non_isoc_methods =
+{
+ .open = dwc_otg_device_non_isoc_open,
+ .close = dwc_otg_device_non_isoc_close,
+ .enter = dwc_otg_device_non_isoc_enter,
+ .start = dwc_otg_device_non_isoc_start,
+};
+
+/*------------------------------------------------------------------------*
+ * at91dci full speed isochronous support
+ *------------------------------------------------------------------------*/
+static void
+dwc_otg_device_isoc_fs_open(struct usb_xfer *xfer)
+{
+ return;
+}
+
+static void
+dwc_otg_device_isoc_fs_close(struct usb_xfer *xfer)
+{
+ dwc_otg_device_done(xfer, USB_ERR_CANCELLED);
+}
+
+static void
+dwc_otg_device_isoc_fs_enter(struct usb_xfer *xfer)
+{
+ struct dwc_otg_softc *sc = DWC_OTG_BUS2SC(xfer->xroot->bus);
+ uint32_t temp;
+ uint32_t nframes;
+
+ DPRINTFN(6, "xfer=%p next=%d nframes=%d\n",
+ xfer, xfer->endpoint->isoc_next, xfer->nframes);
+
+ temp = DWC_OTG_READ_4(sc, DWC_OTG_REG_DSTS);
+
+ /* get the current frame index */
+
+ nframes = DWC_OTG_MSK_DSTS_GET_FNUM(temp);
+
+ if (sc->sc_flags.status_high_speed)
+ nframes /= 8;
+
+ nframes &= DWC_OTG_FRAME_MASK;
+
+ /*
+ * check if the frame index is within the window where the frames
+ * will be inserted
+ */
+ temp = (nframes - xfer->endpoint->isoc_next) & DWC_OTG_FRAME_MASK;
+
+ if ((xfer->endpoint->is_synced == 0) ||
+ (temp < xfer->nframes)) {
+ /*
+ * If there is data underflow or the pipe queue is
+ * empty we schedule the transfer a few frames ahead
+ * of the current frame position. Else two isochronous
+ * transfers might overlap.
+ */
+ xfer->endpoint->isoc_next = (nframes + 3) & DWC_OTG_FRAME_MASK;
+ xfer->endpoint->is_synced = 1;
+ DPRINTFN(3, "start next=%d\n", xfer->endpoint->isoc_next);
+ }
+ /*
+ * compute how many milliseconds the insertion is ahead of the
+ * current frame position:
+ */
+ temp = (xfer->endpoint->isoc_next - nframes) & DWC_OTG_FRAME_MASK;
+
+ /*
+ * pre-compute when the isochronous transfer will be finished:
+ */
+ xfer->isoc_time_complete =
+ usb_isoc_time_expand(&sc->sc_bus, nframes) + temp +
+ xfer->nframes;
+
+ /* compute frame number for next insertion */
+ xfer->endpoint->isoc_next += xfer->nframes;
+
+ /* setup TDs */
+ dwc_otg_setup_standard_chain(xfer);
+}
+
+static void
+dwc_otg_device_isoc_fs_start(struct usb_xfer *xfer)
+{
+ /* start TD chain */
+ dwc_otg_start_standard_chain(xfer);
+}
+
+struct usb_pipe_methods dwc_otg_device_isoc_fs_methods =
+{
+ .open = dwc_otg_device_isoc_fs_open,
+ .close = dwc_otg_device_isoc_fs_close,
+ .enter = dwc_otg_device_isoc_fs_enter,
+ .start = dwc_otg_device_isoc_fs_start,
+};
+
+/*------------------------------------------------------------------------*
+ * at91dci root control support
+ *------------------------------------------------------------------------*
+ * Simulate a hardware HUB by handling all the necessary requests.
+ *------------------------------------------------------------------------*/
+
+static const struct usb_device_descriptor dwc_otg_devd = {
+ .bLength = sizeof(struct usb_device_descriptor),
+ .bDescriptorType = UDESC_DEVICE,
+ .bcdUSB = {0x00, 0x02},
+ .bDeviceClass = UDCLASS_HUB,
+ .bDeviceSubClass = UDSUBCLASS_HUB,
+ .bDeviceProtocol = UDPROTO_HSHUBSTT,
+ .bMaxPacketSize = 64,
+ .bcdDevice = {0x00, 0x01},
+ .iManufacturer = 1,
+ .iProduct = 2,
+ .bNumConfigurations = 1,
+};
+
+static const struct dwc_otg_config_desc dwc_otg_confd = {
+ .confd = {
+ .bLength = sizeof(struct usb_config_descriptor),
+ .bDescriptorType = UDESC_CONFIG,
+ .wTotalLength[0] = sizeof(dwc_otg_confd),
+ .bNumInterface = 1,
+ .bConfigurationValue = 1,
+ .iConfiguration = 0,
+ .bmAttributes = UC_SELF_POWERED,
+ .bMaxPower = 0,
+ },
+ .ifcd = {
+ .bLength = sizeof(struct usb_interface_descriptor),
+ .bDescriptorType = UDESC_INTERFACE,
+ .bNumEndpoints = 1,
+ .bInterfaceClass = UICLASS_HUB,
+ .bInterfaceSubClass = UISUBCLASS_HUB,
+ .bInterfaceProtocol = 0,
+ },
+ .endpd = {
+ .bLength = sizeof(struct usb_endpoint_descriptor),
+ .bDescriptorType = UDESC_ENDPOINT,
+ .bEndpointAddress = (UE_DIR_IN | DWC_OTG_INTR_ENDPT),
+ .bmAttributes = UE_INTERRUPT,
+ .wMaxPacketSize[0] = 8,
+ .bInterval = 255,
+ },
+};
+
+static const struct usb_hub_descriptor_min dwc_otg_hubd = {
+ .bDescLength = sizeof(dwc_otg_hubd),
+ .bDescriptorType = UDESC_HUB,
+ .bNbrPorts = 1,
+ .wHubCharacteristics[0] =
+ (UHD_PWR_NO_SWITCH | UHD_OC_INDIVIDUAL) & 0xFF,
+ .wHubCharacteristics[1] =
+ (UHD_PWR_NO_SWITCH | UHD_OC_INDIVIDUAL) >> 8,
+ .bPwrOn2PwrGood = 50,
+ .bHubContrCurrent = 0,
+ .DeviceRemovable = {0}, /* port is removable */
+};
+
+#define STRING_LANG \
+ 0x09, 0x04, /* American English */
+
+#define STRING_VENDOR \
+ 'D', 0, 'W', 0, 'C', 0, 'O', 0, 'T', 0, 'G', 0
+
+#define STRING_PRODUCT \
+ 'D', 0, 'C', 0, 'I', 0, ' ', 0, 'R', 0, \
+ 'o', 0, 'o', 0, 't', 0, ' ', 0, 'H', 0, \
+ 'U', 0, 'B', 0,
+
+USB_MAKE_STRING_DESC(STRING_LANG, dwc_otg_langtab);
+USB_MAKE_STRING_DESC(STRING_VENDOR, dwc_otg_vendor);
+USB_MAKE_STRING_DESC(STRING_PRODUCT, dwc_otg_product);
+
+static usb_error_t
+dwc_otg_roothub_exec(struct usb_device *udev,
+ struct usb_device_request *req, const void **pptr, uint16_t *plength)
+{
+ struct dwc_otg_softc *sc = DWC_OTG_BUS2SC(udev->bus);
+ const void *ptr;
+ uint16_t len;
+ uint16_t value;
+ uint16_t index;
+ usb_error_t err;
+
+ USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
+
+ /* buffer reset */
+ ptr = (const void *)&sc->sc_hub_temp;
+ len = 0;
+ err = 0;
+
+ value = UGETW(req->wValue);
+ index = UGETW(req->wIndex);
+
+ /* demultiplex the control request */
+
+ switch (req->bmRequestType) {
+ case UT_READ_DEVICE:
+ switch (req->bRequest) {
+ case UR_GET_DESCRIPTOR:
+ goto tr_handle_get_descriptor;
+ case UR_GET_CONFIG:
+ goto tr_handle_get_config;
+ case UR_GET_STATUS:
+ goto tr_handle_get_status;
+ default:
+ goto tr_stalled;
+ }
+ break;
+
+ case UT_WRITE_DEVICE:
+ switch (req->bRequest) {
+ case UR_SET_ADDRESS:
+ goto tr_handle_set_address;
+ case UR_SET_CONFIG:
+ goto tr_handle_set_config;
+ case UR_CLEAR_FEATURE:
+ goto tr_valid; /* nop */
+ case UR_SET_DESCRIPTOR:
+ goto tr_valid; /* nop */
+ case UR_SET_FEATURE:
+ default:
+ goto tr_stalled;
+ }
+ break;
+
+ case UT_WRITE_ENDPOINT:
+ switch (req->bRequest) {
+ case UR_CLEAR_FEATURE:
+ switch (UGETW(req->wValue)) {
+ case UF_ENDPOINT_HALT:
+ goto tr_handle_clear_halt;
+ case UF_DEVICE_REMOTE_WAKEUP:
+ goto tr_handle_clear_wakeup;
+ default:
+ goto tr_stalled;
+ }
+ break;
+ case UR_SET_FEATURE:
+ switch (UGETW(req->wValue)) {
+ case UF_ENDPOINT_HALT:
+ goto tr_handle_set_halt;
+ case UF_DEVICE_REMOTE_WAKEUP:
+ goto tr_handle_set_wakeup;
+ default:
+ goto tr_stalled;
+ }
+ break;
+ case UR_SYNCH_FRAME:
+ goto tr_valid; /* nop */
+ default:
+ goto tr_stalled;
+ }
+ break;
+
+ case UT_READ_ENDPOINT:
+ switch (req->bRequest) {
+ case UR_GET_STATUS:
+ goto tr_handle_get_ep_status;
+ default:
+ goto tr_stalled;
+ }
+ break;
+
+ case UT_WRITE_INTERFACE:
+ switch (req->bRequest) {
+ case UR_SET_INTERFACE:
+ goto tr_handle_set_interface;
+ case UR_CLEAR_FEATURE:
+ goto tr_valid; /* nop */
+ case UR_SET_FEATURE:
+ default:
+ goto tr_stalled;
+ }
+ break;
+
+ case UT_READ_INTERFACE:
+ switch (req->bRequest) {
+ case UR_GET_INTERFACE:
+ goto tr_handle_get_interface;
+ case UR_GET_STATUS:
+ goto tr_handle_get_iface_status;
+ default:
+ goto tr_stalled;
+ }
+ break;
+
+ case UT_WRITE_CLASS_INTERFACE:
+ case UT_WRITE_VENDOR_INTERFACE:
+ /* XXX forward */
+ break;
+
+ case UT_READ_CLASS_INTERFACE:
+ case UT_READ_VENDOR_INTERFACE:
+ /* XXX forward */
+ break;
+
+ case UT_WRITE_CLASS_DEVICE:
+ switch (req->bRequest) {
+ case UR_CLEAR_FEATURE:
+ goto tr_valid;
+ case UR_SET_DESCRIPTOR:
+ case UR_SET_FEATURE:
+ break;
+ default:
+ goto tr_stalled;
+ }
+ break;
+
+ case UT_WRITE_CLASS_OTHER:
+ switch (req->bRequest) {
+ case UR_CLEAR_FEATURE:
+ goto tr_handle_clear_port_feature;
+ case UR_SET_FEATURE:
+ goto tr_handle_set_port_feature;
+ case UR_CLEAR_TT_BUFFER:
+ case UR_RESET_TT:
+ case UR_STOP_TT:
+ goto tr_valid;
+
+ default:
+ goto tr_stalled;
+ }
+ break;
+
+ case UT_READ_CLASS_OTHER:
+ switch (req->bRequest) {
+ case UR_GET_TT_STATE:
+ goto tr_handle_get_tt_state;
+ case UR_GET_STATUS:
+ goto tr_handle_get_port_status;
+ default:
+ goto tr_stalled;
+ }
+ break;
+
+ case UT_READ_CLASS_DEVICE:
+ switch (req->bRequest) {
+ case UR_GET_DESCRIPTOR:
+ goto tr_handle_get_class_descriptor;
+ case UR_GET_STATUS:
+ goto tr_handle_get_class_status;
+
+ default:
+ goto tr_stalled;
+ }
+ break;
+ default:
+ goto tr_stalled;
+ }
+ goto tr_valid;
+
+tr_handle_get_descriptor:
+ switch (value >> 8) {
+ case UDESC_DEVICE:
+ if (value & 0xff) {
+ goto tr_stalled;
+ }
+ len = sizeof(dwc_otg_devd);
+ ptr = (const void *)&dwc_otg_devd;
+ goto tr_valid;
+ case UDESC_CONFIG:
+ if (value & 0xff) {
+ goto tr_stalled;
+ }
+ len = sizeof(dwc_otg_confd);
+ ptr = (const void *)&dwc_otg_confd;
+ goto tr_valid;
+ case UDESC_STRING:
+ switch (value & 0xff) {
+ case 0: /* Language table */
+ len = sizeof(dwc_otg_langtab);
+ ptr = (const void *)&dwc_otg_langtab;
+ goto tr_valid;
+
+ case 1: /* Vendor */
+ len = sizeof(dwc_otg_vendor);
+ ptr = (const void *)&dwc_otg_vendor;
+ goto tr_valid;
+
+ case 2: /* Product */
+ len = sizeof(dwc_otg_product);
+ ptr = (const void *)&dwc_otg_product;
+ goto tr_valid;
+ default:
+ break;
+ }
+ break;
+ default:
+ goto tr_stalled;
+ }
+ goto tr_stalled;
+
+tr_handle_get_config:
+ len = 1;
+ sc->sc_hub_temp.wValue[0] = sc->sc_conf;
+ goto tr_valid;
+
+tr_handle_get_status:
+ len = 2;
+ USETW(sc->sc_hub_temp.wValue, UDS_SELF_POWERED);
+ goto tr_valid;
+
+tr_handle_set_address:
+ if (value & 0xFF00) {
+ goto tr_stalled;
+ }
+ sc->sc_rt_addr = value;
+ goto tr_valid;
+
+tr_handle_set_config:
+ if (value >= 2) {
+ goto tr_stalled;
+ }
+ sc->sc_conf = value;
+ goto tr_valid;
+
+tr_handle_get_interface:
+ len = 1;
+ sc->sc_hub_temp.wValue[0] = 0;
+ goto tr_valid;
+
+tr_handle_get_tt_state:
+tr_handle_get_class_status:
+tr_handle_get_iface_status:
+tr_handle_get_ep_status:
+ len = 2;
+ USETW(sc->sc_hub_temp.wValue, 0);
+ goto tr_valid;
+
+tr_handle_set_halt:
+tr_handle_set_interface:
+tr_handle_set_wakeup:
+tr_handle_clear_wakeup:
+tr_handle_clear_halt:
+ goto tr_valid;
+
+tr_handle_clear_port_feature:
+ if (index != 1) {
+ goto tr_stalled;
+ }
+ DPRINTFN(9, "UR_CLEAR_PORT_FEATURE on port %d\n", index);
+
+ switch (value) {
+ case UHF_PORT_SUSPEND:
+ dwc_otg_wakeup_peer(sc);
+ break;
+
+ case UHF_PORT_ENABLE:
+ sc->sc_flags.port_enabled = 0;
+ break;
+
+ case UHF_PORT_TEST:
+ case UHF_PORT_INDICATOR:
+ case UHF_C_PORT_ENABLE:
+ case UHF_C_PORT_OVER_CURRENT:
+ case UHF_C_PORT_RESET:
+ /* nops */
+ break;
+ case UHF_PORT_POWER:
+ sc->sc_flags.port_powered = 0;
+ dwc_otg_pull_down(sc);
+ dwc_otg_clocks_off(sc);
+ break;
+ case UHF_C_PORT_CONNECTION:
+ /* clear connect change flag */
+ sc->sc_flags.change_connect = 0;
+
+ if (!sc->sc_flags.status_bus_reset) {
+ /* we are not connected */
+ break;
+ }
+ break;
+ case UHF_C_PORT_SUSPEND:
+ sc->sc_flags.change_suspend = 0;
+ break;
+ default:
+ err = USB_ERR_IOERROR;
+ goto done;
+ }
+ goto tr_valid;
+
+tr_handle_set_port_feature:
+ if (index != 1) {
+ goto tr_stalled;
+ }
+ DPRINTFN(9, "UR_SET_PORT_FEATURE\n");
+
+ switch (value) {
+ case UHF_PORT_ENABLE:
+ sc->sc_flags.port_enabled = 1;
+ break;
+ case UHF_PORT_SUSPEND:
+ case UHF_PORT_RESET:
+ case UHF_PORT_TEST:
+ case UHF_PORT_INDICATOR:
+ /* nops */
+ break;
+ case UHF_PORT_POWER:
+ sc->sc_flags.port_powered = 1;
+ break;
+ default:
+ err = USB_ERR_IOERROR;
+ goto done;
+ }
+ goto tr_valid;
+
+tr_handle_get_port_status:
+
+ DPRINTFN(9, "UR_GET_PORT_STATUS\n");
+
+ if (index != 1) {
+ goto tr_stalled;
+ }
+ if (sc->sc_flags.status_vbus) {
+ dwc_otg_clocks_on(sc);
+ } else {
+ dwc_otg_clocks_off(sc);
+ }
+
+ /* Select Device Side Mode */
+
+ value = UPS_PORT_MODE_DEVICE;
+
+ if (sc->sc_flags.status_high_speed) {
+ value |= UPS_HIGH_SPEED;
+ }
+ if (sc->sc_flags.port_powered) {
+ value |= UPS_PORT_POWER;
+ }
+ if (sc->sc_flags.port_enabled) {
+ value |= UPS_PORT_ENABLED;
+ }
+ if (sc->sc_flags.status_vbus &&
+ sc->sc_flags.status_bus_reset) {
+ value |= UPS_CURRENT_CONNECT_STATUS;
+ }
+ if (sc->sc_flags.status_suspend) {
+ value |= UPS_SUSPEND;
+ }
+ USETW(sc->sc_hub_temp.ps.wPortStatus, value);
+
+ value = 0;
+
+ if (sc->sc_flags.change_connect) {
+ value |= UPS_C_CONNECT_STATUS;
+ }
+ if (sc->sc_flags.change_suspend) {
+ value |= UPS_C_SUSPEND;
+ }
+ USETW(sc->sc_hub_temp.ps.wPortChange, value);
+ len = sizeof(sc->sc_hub_temp.ps);
+ goto tr_valid;
+
+tr_handle_get_class_descriptor:
+ if (value & 0xFF) {
+ goto tr_stalled;
+ }
+ ptr = (const void *)&dwc_otg_hubd;
+ len = sizeof(dwc_otg_hubd);
+ goto tr_valid;
+
+tr_stalled:
+ err = USB_ERR_STALLED;
+tr_valid:
+done:
+ *plength = len;
+ *pptr = ptr;
+ return (err);
+}
+
+static void
+dwc_otg_xfer_setup(struct usb_setup_params *parm)
+{
+ const struct usb_hw_ep_profile *pf;
+ struct usb_xfer *xfer;
+ void *last_obj;
+ uint32_t ntd;
+ uint32_t n;
+ uint8_t ep_no;
+
+ xfer = parm->curr_xfer;
+
+ /*
+ * NOTE: This driver does not use any of the parameters that
+ * are computed from the following values. Just set some
+ * reasonable dummies:
+ */
+ parm->hc_max_packet_size = 0x500;
+ parm->hc_max_packet_count = 1;
+ parm->hc_max_frame_size = 0x500;
+
+ usbd_transfer_setup_sub(parm);
+
+ /*
+ * compute maximum number of TDs
+ */
+ if ((xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE) == UE_CONTROL) {
+
+ ntd = xfer->nframes + 1 /* STATUS */ + 1 /* SYNC 1 */
+ + 1 /* SYNC 2 */ ;
+ } else {
+
+ ntd = xfer->nframes + 1 /* SYNC */ ;
+ }
+
+ /*
+ * check if "usbd_transfer_setup_sub" set an error
+ */
+ if (parm->err)
+ return;
+
+ /*
+ * allocate transfer descriptors
+ */
+ last_obj = NULL;
+
+ /*
+ * get profile stuff
+ */
+ ep_no = xfer->endpointno & UE_ADDR;
+ dwc_otg_get_hw_ep_profile(parm->udev, &pf, ep_no);
+
+ if (pf == NULL) {
+ /* should not happen */
+ parm->err = USB_ERR_INVAL;
+ return;
+ }
+
+ /* align data */
+ parm->size[0] += ((-parm->size[0]) & (USB_HOST_ALIGN - 1));
+
+ for (n = 0; n != ntd; n++) {
+
+ struct dwc_otg_td *td;
+
+ if (parm->buf) {
+
+ td = USB_ADD_BYTES(parm->buf, parm->size[0]);
+
+ /* init TD */
+ td->max_packet_size = xfer->max_packet_size;
+ td->ep_no = ep_no;
+ td->obj_next = last_obj;
+
+ last_obj = td;
+ }
+ parm->size[0] += sizeof(*td);
+ }
+
+ xfer->td_start[0] = last_obj;
+}
+
+static void
+dwc_otg_xfer_unsetup(struct usb_xfer *xfer)
+{
+ return;
+}
+
+static void
+dwc_otg_ep_init(struct usb_device *udev, struct usb_endpoint_descriptor *edesc,
+ struct usb_endpoint *ep)
+{
+ struct dwc_otg_softc *sc = DWC_OTG_BUS2SC(udev->bus);
+
+ DPRINTFN(2, "endpoint=%p, addr=%d, endpt=%d, mode=%d (%d,%d)\n",
+ ep, udev->address,
+ edesc->bEndpointAddress, udev->flags.usb_mode,
+ sc->sc_rt_addr, udev->device_index);
+
+ if (udev->device_index != sc->sc_rt_addr) {
+
+ if (udev->flags.usb_mode != USB_MODE_DEVICE) {
+ /* not supported */
+ return;
+ }
+ if (udev->speed != USB_SPEED_FULL &&
+ udev->speed != USB_SPEED_HIGH) {
+ /* not supported */
+ return;
+ }
+ if ((edesc->bmAttributes & UE_XFERTYPE) == UE_ISOCHRONOUS)
+ ep->methods = &dwc_otg_device_isoc_fs_methods;
+ else
+ ep->methods = &dwc_otg_device_non_isoc_methods;
+ }
+}
+
+static void
+dwc_otg_set_hw_power_sleep(struct usb_bus *bus, uint32_t state)
+{
+ struct dwc_otg_softc *sc = DWC_OTG_BUS2SC(bus);
+
+ switch (state) {
+ case USB_HW_POWER_SUSPEND:
+ dwc_otg_suspend(sc);
+ break;
+ case USB_HW_POWER_SHUTDOWN:
+ dwc_otg_uninit(sc);
+ break;
+ case USB_HW_POWER_RESUME:
+ dwc_otg_resume(sc);
+ break;
+ default:
+ break;
+ }
+}
+
+struct usb_bus_methods dwc_otg_bus_methods =
+{
+ .endpoint_init = &dwc_otg_ep_init,
+ .xfer_setup = &dwc_otg_xfer_setup,
+ .xfer_unsetup = &dwc_otg_xfer_unsetup,
+ .get_hw_ep_profile = &dwc_otg_get_hw_ep_profile,
+ .set_stall = &dwc_otg_set_stall,
+ .clear_stall = &dwc_otg_clear_stall,
+ .roothub_exec = &dwc_otg_roothub_exec,
+ .xfer_poll = &dwc_otg_do_poll,
+ .device_state_change = &dwc_otg_device_state_change,
+ .set_hw_power_sleep = &dwc_otg_set_hw_power_sleep,
+};
diff -r 6ace9965d408 -r c912f3c9bbad head/sys/dev/usb/controller/dwc_otg.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/head/sys/dev/usb/controller/dwc_otg.h Sun Jan 22 00:40:32 2012 +0200
@@ -0,0 +1,437 @@
+/* $FreeBSD: head/sys/dev/usb/controller/dwc_otg.h 230424 2012-01-21 13:31:38Z hselasky $ */
+/*-
+ * Copyright (c) 2012 Hans Petter Selasky. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef _DWC_OTG_H_
+#define _DWC_OTG_H_
+
+#define DWC_OTG_MAX_DEVICES (USB_MIN_DEVICES + 1)
+#define DWC_OTG_FRAME_MASK 0x7FF
+#define DWC_OTG_MAX_TXP 4
+#define DWC_OTG_MAX_TXN (0x200 * DWC_OTG_MAX_TXP)
+
+/* Global CSR registers */
+
+#define DWC_OTG_REG_GOTGCTL 0x0000
+#define DWC_OTG_MSK_GOTGCTL_CHIRP_ON (1U << 27)
+#define DWC_OTG_MSK_GOTGCTL_BSESS_VALID (1U << 19)
+#define DWC_OTG_MSK_GOTGCTL_ASESS_VALID (1U << 18)
+#define DWC_OTG_MSK_GOTGCTL_CONN_ID_STATUS (1U << 16)
+#define DWC_OTG_MSK_GOTGCTL_SESS_REQ (1U << 1)
+#define DWC_OTG_MSK_GOTGCTL_SESS_VALID (1U << 0)
+
+#define DWC_OTG_REG_GOTGINT 0x0004
+#define DWC_OTG_REG_GAHBCFG 0x0008
+#define DWC_OTG_MSK_GAHBCFG_GLOBAL_IRQ (1U << 0)
+
+#define DWC_OTG_REG_GUSBCFG 0x000C
+#define DWC_OTG_MSK_GUSBCFG_FORCE_DEVICE (1U << 30)
+#define DWC_OTG_MSK_GUSBCFG_FORCE_HOST (1U << 29)
+#define DWC_OTG_MSK_GUSBCFG_NO_PULLUP (1U << 27)
+#define DWC_OTG_MSK_GUSBCFG_NO_PULLUP (1U << 27)
+#define DWC_OTG_MSK_GUSBCFG_IC_USB_CAP (1U << 26)
+#define DWC_OTG_MSK_GUSBCFG_ULPI_FS_LS (1U << 17)
+#define DWC_OTG_MSK_GUSBCFG_TRD_TIM(x) (((x) & 15U) << 10)
+#define DWC_OTG_MSK_GUSBCFG_HRP (1U << 9)
+#define DWC_OTG_MSK_GUSBCFG_SRP (1U << 8)
+#define DWC_OTG_MSK_GUSBCFG_HS_PHY (1U << 6)
+#define DWC_OTG_MSK_GUSBCFG_FS_INTF (1U << 5)
+#define DWC_OTG_MSK_GUSBCFG_ULPI_UMTI_SEL (1U << 4)
+#define DWC_OTG_MSK_GUSBCFG_PHY_INTF (1U << 3)
+
+#define DWC_OTG_REG_GRSTCTL 0x0010
+#define DWC_OTG_MSK_GRSTCTL_TXFIFO(n) (((n) & 31U) << 6)
+#define DWC_OTG_MSK_GRSTCTL_TXFFLUSH (1U << 5)
+#define DWC_OTG_MSK_GRSTCTL_RXFFLUSH (1U << 4)
+#define DWC_OTG_MSK_GRSTCTL_FRMCNTRRST (1U << 2)
+#define DWC_OTG_MSK_GRSTCTL_CSFTRST (1U << 0)
+
+#define DWC_OTG_REG_GINTSTS 0x0014
+#define DWC_OTG_REG_GINTMSK 0x0018
+#define DWC_OTG_MSK_GINT_WKUPINT (1U << 31)
+#define DWC_OTG_MSK_GINT_SESSREQINT (1U << 30)
+#define DWC_OTG_MSK_GINT_DISCONNINT (1U << 29)
+#define DWC_OTG_MSK_GINT_CONNIDSTSCHNG (1U << 28)
+#define DWC_OTG_MSK_GINT_LPM (1U << 27)
+#define DWC_OTG_MSK_GINT_PTXFEMP (1U << 26)
+#define DWC_OTG_MSK_GINT_HCHINT (1U << 25)
+#define DWC_OTG_MSK_GINT_PRTINT (1U << 24)
+#define DWC_OTG_MSK_GINT_RESETDET (1U << 23)
+#define DWC_OTG_MSK_GINT_FETSUSP (1U << 22)
+#define DWC_OTG_MSK_GINT_INCOMPL_P (1U << 21)
+#define DWC_OTG_MSK_GINT_INCOMPL_ISO_IN (1U << 20)
+#define DWC_OTG_MSK_GINT_OUTEP (1U << 19)
+#define DWC_OTG_MSK_GINT_INEP (1U << 18)
+#define DWC_OTG_MSK_GINT_EP_MISMATCH (1U << 17)
+#define DWC_OTG_MSK_GINT_RESTORE_DONE (1U << 16)
+#define DWC_OTG_MSK_GINT_EOP_FRAME (1U << 15)
+#define DWC_OTG_MSK_GINT_ISO_OUT_DROP (1U << 14)
+#define DWC_OTG_MSK_GINT_ENUM_DONE (1U << 13)
+#define DWC_OTG_MSK_GINT_USB_RESET (1U << 12)
+#define DWC_OTG_MSK_GINT_USB_SUSPEND (1U << 11)
+#define DWC_OTG_MSK_GINT_EARLY_SUSPEND (1U << 10)
+#define DWC_OTG_MSK_GINT_I2C_INT (1U << 9)
+#define DWC_OTG_MSK_GINT_ULPI_CARKIT (1U << 8)
+#define DWC_OTG_MSK_GINT_GLOBAL_OUT_NAK (1U << 7)
+#define DWC_OTG_MSK_GINT_GLOBAL_IN_NAK (1U << 6)
+#define DWC_OTG_MSK_GINT_NPTXFEMP (1U << 5)
+#define DWC_OTG_MSK_GINT_RXFLVL (1U << 4)
+#define DWC_OTG_MSK_GINT_SOF (1U << 3)
+#define DWC_OTG_MSK_GINT_OTG (1U << 2)
+#define DWC_OTG_MSK_GINT_MODE_MISMATCH (1U << 1)
+#define DWC_OTG_MSK_GINT_CUR_MODE (1U << 0)
+
+#define DWC_OTG_REG_GRXSTSR 0x001C
+#define DWC_OTG_REG_GRXSTSP 0x0020
+#define DWC_OTG_MSK_GRXSTS_PACKET_STS (15U << 17)
+#define DWC_OTG_MSK_GRXSTS_HST_IN_DATA (2U << 17)
+#define DWC_OTG_MSK_GRXSTS_HST_IN_COMPLETE (3U << 17)
+#define DWC_OTG_MSK_GRXSTS_HST_DT_ERROR (5U << 17)
+#define DWC_OTG_MSK_GRXSTS_HST_HALTED (7U << 17)
+#define DWC_OTG_MSK_GRXSTS_DEV_GLOB_OUT_NAK (1U << 17)
+#define DWC_OTG_MSK_GRXSTS_DEV_OUT_DATA (2U << 17)
+#define DWC_OTG_MSK_GRXSTS_DEV_OUT_COMPLETE (3U << 17)
+#define DWC_OTG_MSK_GRXSTS_DEV_STP_COMPLETE (4U << 17)
+#define DWC_OTG_MSK_GRXSTS_DEV_STP_DATA (6U << 17)
+#define DWC_OTG_MSK_GRXSTS_PID (3U << 15)
+#define DWC_OTG_MSK_GRXSTS_PID_DATA0 (0U << 15)
+#define DWC_OTG_MSK_GRXSTS_PID_DATA1 (2U << 15)
+#define DWC_OTG_MSK_GRXSTS_PID_DATA2 (1U << 15)
+#define DWC_OTG_MSK_GRXSTS_PID_MDATA (3U << 15)
+#define DWC_OTG_MSK_GRXSTS_GET_BYTE_CNT(x) (((x) >> 4) & 0x7FFU)
+#define DWC_OTG_MSK_GRXSTS_GET_CHANNEL(x) ((x) & 15U)
+#define DWC_OTG_MSK_GRXSTS_GET_FRNUM (x) (((x) >> 21) & 15U)
+
+#define DWC_OTG_REG_GRXFSIZ 0x0024
+#define DWC_OTG_REG_GNPTXFSIZ 0x0028
+#define DWC_OTG_REG_GNPTXSTS 0x002C
+#define DWC_OTG_REG_GI2CCTL 0x0030
+#define DWC_OTG_REG_GPVNDCTL 0x0034
+#define DWC_OTG_REG_GGPIO 0x0038
+#define DWC_OTG_REG_GUID 0x003C
+#define DWC_OTG_REG_GSNPSID 0x0040
+#define DWC_OTG_REG_GHWCFG1 0x0044
+#define DWC_OTG_MSK_GHWCFG1_GET_DIR(x, n) (((x) >> (2 * (n))) & 3U)
+#define DWC_OTG_MSK_GHWCFG1_BIDIR (0U)
+#define DWC_OTG_MSK_GHWCFG1_IN (1U)
+#define DWC_OTG_MSK_GHWCFG1_OUT (2U)
+#define DWC_OTG_REG_GHWCFG2 0x0048
+#define DWC_OTG_MSK_GHWCFG2_NUM_DEV_EP(x) ((((x) >> 10) & 15) + 1)
+#define DWC_OTG_MSK_GHWCFG2_NUM_HOST_EP(x) ((((x) >> 14) & 15) + 1)
+#define DWC_OTG_REG_GHWCFG3 0x004C
+#define DWC_OTG_MSK_GHWCFG3_GET_DFIFO(x) ((x) >> 16)
+#define DWC_OTG_MSK_GHWCFG3_PKT_SIZE (0x10U << (((x) >> 4) & 7))
+#define DWC_OTG_MSK_GHWCFG3_XFR_SIZE (0x400U << (((x) >> 0) & 15))
+
+#define DWC_OTG_REG_GHWCFG4 0x0050
+#define DWC_OTG_MSK_GHWCFG4_NUM_IN_EPS(x) ((((x) >> 26) & 15U) + 1U)
+#define DWC_OTG_MSK_GHWCFG4_NUM_CTRL_EPS(x) (((x) >> 16) & 15U)
+#define DWC_OTG_MSK_GHWCFG4_NUM_IN_PERIODIC_EPS(x) (((x) >> 0) & 15U)
+
+#define DWC_OTG_REG_GLPMCFG 0x0054
+#define DWC_OTG_MSK_GLPMCFG_HSIC_CONN (1U << 30)
+#define DWC_OTG_REG_GPWRDN 0x0058
+#define DWC_OTG_MSK_GPWRDN_BVALID (1U << 22)
+#define DWC_OTG_MSK_GPWRDN_IDDIG (1U << 21)
+#define DWC_OTG_MSK_GPWRDN_CONNDET_INT (1U << 14)
+#define DWC_OTG_MSK_GPWRDN_CONNDET (1U << 13)
+#define DWC_OTG_MSK_GPWRDN_DISCONN_INT (1U << 12)
+#define DWC_OTG_MSK_GPWRDN_DISCONN (1U << 11)
+#define DWC_OTG_MSK_GPWRDN_RESETDET_INT (1U << 10)
+#define DWC_OTG_MSK_GPWRDN_RESETDET (1U << 9)
+#define DWC_OTG_MSK_GPWRDN_LINESTATE_INT (1U << 8)
+#define DWC_OTG_MSK_GPWRDN_LINESTATE (1U << 7)
+#define DWC_OTG_MSK_GPWRDN_DISABLE_VBUS (1U << 6)
+#define DWC_OTG_MSK_GPWRDN_POWER_DOWN (1U << 5)
+#define DWC_OTG_MSK_GPWRDN_POWER_DOWN_RST (1U << 4)
+#define DWC_OTG_MSK_GPWRDN_POWER_DOWN_CLAMP (1U << 3)
+#define DWC_OTG_MSK_GPWRDN_RESTORE (1U << 2)
+#define DWC_OTG_MSK_GPWRDN_PMU_ACTIVE (1U << 1)
+#define DWC_OTG_MSK_GPWRDN_PMU_IRQ_SEL (1U << 0)
+
+#define DWC_OTG_REG_GDFIFOCFG 0x005C
+#define DWC_OTG_REG_GADPCTL 0x0060
+#define DWC_OTG_REG_HPTXFSIZ 0x0100
+#define DWC_OTG_REG_DPTXFSIZ(n) (0x0100 + (4*(n)))
+#define DWC_OTG_REG_DIEPTXF(n) (0x0100 + (4*(n)))
+
+/* Host Mode CSR registers */
+
+#define DWC_OTG_REG_HCFG 0x0400
+#define DWC_OTG_REG_HFIR 0x0404
+#define DWC_OTG_REG_HFNUM 0x0408
+#define DWC_OTG_REG_HPTXSTS 0x0410
+#define DWC_OTG_REG_HAINT 0x0414
+#define DWC_OTG_REG_HAINTMSK 0x0418
+#define DWC_OTG_REG_HPRT 0x0440
+#define DWC_OTG_REG_HCCHAR(n) (0x0500 + (32*(n)))
+#define DWC_OTG_REG_HCSPLT(n) (0x0504 + (32*(n)))
+#define DWC_OTG_REG_HCINT(n) (0x0508 + (32*(n)))
+#define DWC_OTG_REG_HCINTMSK(n) (0x050C + (32*(n)))
+#define DWC_OTG_REG_HCTSIZ(n) (0x0510 + (32*(n)))
+#define DWC_OTG_REG_HCDMA(n) (0x0514 + (32*(n)))
+#define DWC_OTG_REG_HCDMAB(n) (0x051C + (32*(n)))
+
+/* Device Mode CSR registers */
+
+#define DWC_OTG_REG_DCFG 0x0800
+#define DWC_OTG_MSK_DCFG_SET_DEV_ADDR(x) (((x) & 0x7FU) << 4)
+#define DWC_OTG_MSK_DCFG_SET_DEV_SPEED(x) ((x) & 0x3U)
+#define DWC_OTG_MSK_DCFG_DEV_SPEED_HI (0U)
+#define DWC_OTG_MSK_DCFG_DEV_SPEED_FULL20 (1U)
+#define DWC_OTG_MSK_DCFG_DEV_SPEED_FULL10 (3U)
+
+#define DWC_OTG_REG_DCTL 0x0804
+#define DWC_OTG_MSK_DCTL_PWRON_PROG_DONE (1U << 11)
+#define DWC_OTG_MSK_DCTL_CGOUT_NAK (1U << 10)
+#define DWC_OTG_MSK_DCTL_CGNPIN_NAK (1U << 8)
+#define DWC_OTG_MSK_DCTL_SOFT_DISC (1U << 1)
+#define DWC_OTG_MSK_DCTL_REMOTE_WAKEUP (1U << 0)
+
+#define DWC_OTG_REG_DSTS 0x0808
+#define DWC_OTG_MSK_DSTS_GET_FNUM(x) (((x) >> 8) & 0x3FFF)
+#define DWC_OTG_MSK_DSTS_GET_ENUM_SPEED(x) (((x) >> 1) & 3U)
+#define DWC_OTG_MSK_DSTS_ENUM_SPEED_HI (0U)
+#define DWC_OTG_MSK_DSTS_ENUM_SPEED_FULL20 (1U)
+#define DWC_OTG_MSK_DSTS_ENUM_SPEED_LOW10 (2U)
+#define DWC_OTG_MSK_DSTS_ENUM_SPEED_FULL10 (3U)
+#define DWC_OTG_MSK_DSTS_SUSPEND (1U << 0)
+
+#define DWC_OTG_REG_DIEPMSK 0x0810
+#define DWC_OTG_MSK_DIEP_FIFO_EMPTY (1U << 4)
+#define DWC_OTG_MSK_DIEP_XFER_COMPLETE (1U << 0)
+
+#define DWC_OTG_REG_DOEPMSK 0x0814
+#define DWC_OTG_MSK_DOEP_FIFO_EMPTY (1U << 4)
+#define DWC_OTG_MSK_DOEP_XFER_COMPLETE (1U << 0)
+
+#define DWC_OTG_REG_DAINT 0x0818
+#define DWC_OTG_REG_DAINTMSK 0x081C
+
+#define DWC_OTG_MSK_ENDPOINT(x,in) \
+ ((in) ? (1U << ((x) & 15U)) : \
+ (0x10000U << ((x) & 15U)))
+
+#define DWC_OTG_REG_DTKNQR1 0x0820
+#define DWC_OTG_REG_DTKNQR2 0x0824
+#define DWC_OTG_REG_DTKNQR3 0x0830
+#define DWC_OTG_REG_DTKNQR4 0x0834
+#define DWC_OTG_REG_DVBUSDIS 0x0828
+#define DWC_OTG_REG_DVBUSPULSE 0x082C
+#define DWC_OTG_REG_DTHRCTL 0x0830
+#define DWC_OTG_REG_DIEPEMPMSK 0x0834
+#define DWC_OTG_REG_DEACHINT 0x0838
+#define DWC_OTG_REG_DEACHINTMSK 0x083C
+#define DWC_OTG_REG_DIEPEACHMSK(n) (0x0840 + (4*(n)))
+#define DWC_OTG_MSK_DIEPEACH_XFER_COMPLETE (1U << 0)
+
+#define DWC_OTG_REG_DOEPEACHMSK(n) (0x0880 + (4*(n)))
+#define DWC_OTG_MSK_DOEPEACH_SETUP (1U << 3)
+#define DWC_OTG_MSK_DOEPEACH_XFER_COMPLETE (1U << 0)
+
+#define DWC_OTG_REG_DIEPCTL(n) (0x0900 + (32*(n)))
+#define DWC_OTG_MSK_DIEPCTL_ENABLE (1U << 31)
+#define DWC_OTG_MSK_DIEPCTL_DISABLE (1U << 30)
+#define DWC_OTG_MSK_DIEPCTL_SET_DATA1 (1U << 29) /* non-control */
+#define DWC_OTG_MSK_DIEPCTL_SET_DATA0 (1U << 28) /* non-control */
+#define DWC_OTG_MSK_DIEPCTL_SET_NAK (1U << 27)
+#define DWC_OTG_MSK_DIEPCTL_CLR_NAK (1U << 26)
+#define DWC_OTG_MSK_DIEPCTL_FNUM(n) (((n) & 15U) << 22)
+#define DWC_OTG_MSK_DIEPCTL_STALL (1U << 21)
+#define DWC_OTG_MSK_EP_SET_TYPE(n) (((n) & 3) << 18)
+#define DWC_OTG_MSK_EP_TYPE_CONTROL (0U)
+#define DWC_OTG_MSK_EP_TYPE_ISOC (1U)
+#define DWC_OTG_MSK_EP_TYPE_BULK (2U)
+#define DWC_OTG_MSK_EP_TYPE_INTERRUPT (3U)
+#define DWC_OTG_MSK_DIEPCTL_USB_AEP (1U << 15)
+#define DWC_OTG_MSK_DIEPCTL_MPS_64 (0U << 0) /* control-only */
+#define DWC_OTG_MSK_DIEPCTL_MPS_32 (1U << 0) /* control-only */
+#define DWC_OTG_MSK_DIEPCTL_MPS_16 (2U << 0) /* control-only */
+#define DWC_OTG_MSK_DIEPCTL_MPS_8 (3U << 0) /* control-only */
+#define DWC_OTG_MSK_DIEPCTL_MPS(n) ((n) & 0x7FF) /* non-control */
+
+#define DWC_OTG_REG_DIEPINT(n) (0x0908 + (32*(n)))
+#define DWC_OTG_MSK_DXEPINT_TXFEMP (1U << 7)
+#define DWC_OTG_MSK_DXEPINT_SETUP (1U << 3)
+#define DWC_OTG_MSK_DXEPINT_XFER_COMPL (1U << 0)
+
+#define DWC_OTG_REG_DIEPTSIZ(n) (0x0910 + (32*(n)))
+#define DWC_OTG_MSK_DXEPTSIZ_SET_MULTI(n) (((n) & 3) << 29)
+#define DWC_OTG_MSK_DXEPTSIZ_SET_NPKT(n) (((n) & 0x3FF) << 19)
+#define DWC_OTG_MSK_DXEPTSIZ_GET_NPKT(n) (((n) >> 19) & 0x3FF)
+#define DWC_OTG_MSK_DXEPTSIZ_SET_NBYTES(n) (((n) & 0x7FFFFF) << 0)
+#define DWC_OTG_MSK_DXEPTSIZ_GET_NBYTES(n) (((n) >> 0) & 0x7FFFFF)
+
+#define DWC_OTG_REG_DIEPDMA(n) (0x0914 + (32*(n)))
+#define DWC_OTG_REG_DTXFSTS(n) (0x0918 + (32*(n)))
+#define DWC_OTG_REG_DIEPDMAB0 (0x091C + (32*(n)))
+
+#define DWC_OTG_REG_DOEPCTL(n) (0x0B00 + (32*(n)))
+#define DWC_OTG_MSK_DOEPCTL_ENABLE (1U << 31)
+#define DWC_OTG_MSK_DOEPCTL_DISABLE (1U << 30)
+#define DWC_OTG_MSK_DOEPCTL_SET_DATA1 (1U << 29) /* non-control */
+#define DWC_OTG_MSK_DOEPCTL_SET_DATA0 (1U << 28) /* non-control */
+#define DWC_OTG_MSK_DOEPCTL_SET_NAK (1U << 27)
+#define DWC_OTG_MSK_DOEPCTL_CLR_NAK (1U << 26)
+#define DWC_OTG_MSK_DOEPCTL_FNUM(n) (((n) & 15U) << 22)
+#define DWC_OTG_MSK_DOEPCTL_STALL (1U << 21)
+#define DWC_OTG_MSK_DOEPCTL_EP_TYPE(n) (((n) & 3) << 18)
+#define DWC_OTG_MSK_DOEPCTL_USB_AEP (1U << 15)
+#define DWC_OTG_MSK_DOEPCTL_MPS_64 (0U << 0) /* control-only */
+#define DWC_OTG_MSK_DOEPCTL_MPS_32 (1U << 0) /* control-only */
+#define DWC_OTG_MSK_DOEPCTL_MPS_16 (2U << 0) /* control-only */
+#define DWC_OTG_MSK_DOEPCTL_MPS_8 (3U << 0) /* control-only */
+#define DWC_OTG_MSK_DOEPCTL_MPS(n) ((n) & 0x7FF) /* non-control */
+
+#define DWC_OTG_REG_DOEPINT(n) (0x0B08 + (32*(n)))
+#define DWC_OTG_REG_DOEPTSIZ(n) (0x0B10 + (32*(n)))
+#define DWC_OTG_REG_DOEPDMA(n) (0x0B14 + (32*(n)))
+#define DWC_OTG_REG_DOEPDMAB(n) (0x0B1C + (32*(n)))
+
+/* FIFO access registers */
+
+#define DWC_OTG_REG_DFIFO(n) (0x1000 + (0x1000 * (n)))
+
+/* Power and clock gating CSR */
+
+#define DWC_OTG_REG_PCGCCTL 0x0E00
+
+#define DWC_OTG_READ_4(sc, reg) \
+ bus_space_read_4((sc)->sc_io_tag, (sc)->sc_io_hdl, reg)
+
+#define DWC_OTG_WRITE_4(sc, reg, data) \
+ bus_space_write_4((sc)->sc_io_tag, (sc)->sc_io_hdl, reg, data)
+
+struct dwc_otg_td;
+struct dwc_otg_softc;
+
+typedef uint8_t (dwc_otg_cmd_t)(struct dwc_otg_td *td);
+
+struct dwc_otg_td {
+ struct dwc_otg_td *obj_next;
+ dwc_otg_cmd_t *func;
+ struct usb_page_cache *pc;
+ uint32_t tx_bytes;
+ uint32_t offset;
+ uint32_t remainder;
+ uint16_t max_packet_size; /* packet_size */
+ uint16_t npkt;
+ uint8_t ep_no;
+ uint8_t error:1;
+ uint8_t alt_next:1;
+ uint8_t short_pkt:1;
+ uint8_t did_stall:1;
+};
+
+struct dwc_otg_std_temp {
+ dwc_otg_cmd_t *func;
+ struct usb_page_cache *pc;
+ struct dwc_otg_td *td;
+ struct dwc_otg_td *td_next;
+ uint32_t len;
+ uint32_t offset;
+ uint16_t max_frame_size;
+ uint8_t short_pkt;
+ /*
+ * short_pkt = 0: transfer should be short terminated
+ * short_pkt = 1: transfer should not be short terminated
+ */
+ uint8_t setup_alt_next;
+ uint8_t did_stall;
+ uint8_t bulk_or_control;
+};
+
+struct dwc_otg_config_desc {
+ struct usb_config_descriptor confd;
+ struct usb_interface_descriptor ifcd;
+ struct usb_endpoint_descriptor endpd;
+} __packed;
+
+union dwc_otg_hub_temp {
+ uWord wValue;
+ struct usb_port_status ps;
+};
+
+struct dwc_otg_flags {
+ uint8_t change_connect:1;
+ uint8_t change_suspend:1;
+ uint8_t status_suspend:1; /* set if suspended */
+ uint8_t status_vbus:1; /* set if present */
+ uint8_t status_bus_reset:1; /* set if reset complete */
+ uint8_t status_high_speed:1; /* set if High Speed is selected */
+ uint8_t remote_wakeup:1;
+ uint8_t self_powered:1;
+ uint8_t clocks_off:1;
+ uint8_t port_powered:1;
+ uint8_t port_enabled:1;
+ uint8_t d_pulled_up:1;
+};
+
+struct dwc_otg_profile {
+ struct usb_hw_ep_profile usb;
+ uint16_t max_buffer;
+};
+
+struct dwc_otg_softc {
+ struct usb_bus sc_bus;
+ union dwc_otg_hub_temp sc_hub_temp;
+ struct dwc_otg_profile sc_hw_ep_profile[16];
+
+ struct usb_device *sc_devices[DWC_OTG_MAX_DEVICES];
+ struct resource *sc_io_res;
+ struct resource *sc_irq_res;
+ void *sc_intr_hdl;
+ bus_size_t sc_io_size;
+ bus_space_tag_t sc_io_tag;
+ bus_space_handle_t sc_io_hdl;
+
+ uint32_t sc_rx_bounce_buffer[1024 / 4];
+ uint32_t sc_tx_bounce_buffer[(512 * DWC_OTG_MAX_TXP) / 4];
+
+ uint32_t sc_fifo_size;
+ uint32_t sc_irq_mask;
+ uint32_t sc_last_rx_status;
+ uint32_t sc_out_ctl[16];
+ uint32_t sc_in_ctl[16];
+
+ uint16_t sc_active_out_ep;
+
+ uint8_t sc_dev_ep_max;
+ uint8_t sc_dev_in_ep_max;
+ uint8_t sc_rt_addr; /* root HUB address */
+ uint8_t sc_conf; /* root HUB config */
+
+ uint8_t sc_hub_idata[1];
+
+ struct dwc_otg_flags sc_flags;
+};
+
+/* prototypes */
+
+void dwc_otg_interrupt(struct dwc_otg_softc *);
+int dwc_otg_init(struct dwc_otg_softc *);
+void dwc_otg_uninit(struct dwc_otg_softc *);
+
+#endif /* _DWC_OTG_H_ */
diff -r 6ace9965d408 -r c912f3c9bbad head/sys/dev/usb/controller/dwc_otg_atmelarm.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/head/sys/dev/usb/controller/dwc_otg_atmelarm.c Sun Jan 22 00:40:32 2012 +0200
@@ -0,0 +1,199 @@
+/*-
+ * Copyright (c) 2012 Hans Petter Selasky. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD: head/sys/dev/usb/controller/dwc_otg_atmelarm.c 230424 2012-01-21 13:31:38Z hselasky $");
+
+#include <sys/stdint.h>
+#include <sys/stddef.h>
+#include <sys/param.h>
+#include <sys/queue.h>
+#include <sys/types.h>
+#include <sys/systm.h>
+#include <sys/kernel.h>
+#include <sys/bus.h>
+#include <sys/module.h>
+#include <sys/lock.h>
+#include <sys/mutex.h>
+#include <sys/condvar.h>
+#include <sys/sysctl.h>
+#include <sys/sx.h>
+#include <sys/unistd.h>
+#include <sys/callout.h>
+#include <sys/malloc.h>
+#include <sys/priv.h>
+
+#include <dev/usb/usb.h>
+#include <dev/usb/usbdi.h>
+
+#include <dev/usb/usb_core.h>
+#include <dev/usb/usb_busdma.h>
+#include <dev/usb/usb_process.h>
+#include <dev/usb/usb_util.h>
+
+#include <dev/usb/usb_controller.h>
+#include <dev/usb/usb_bus.h>
+
+#include <dev/usb/controller/dwc_otg.h>
+
+static device_probe_t dwc_otg_probe;
+static device_attach_t dwc_otg_attach;
+static device_detach_t dwc_otg_detach;
+
+struct dwc_otg_super_softc {
+ struct dwc_otg_softc sc_otg; /* must be first */
+};
+
+static int
+dwc_otg_probe(device_t dev)
+{
+ device_set_desc(dev, "DWC OTG 2.0 integrated USB controller");
+ return (0);
+}
+
+static int
+dwc_otg_attach(device_t dev)
+{
+ struct dwc_otg_super_softc *sc = device_get_softc(dev);
+ int err;
+ int rid;
+
+ /* initialise some bus fields */
+ sc->sc_otg.sc_bus.parent = dev;
+ sc->sc_otg.sc_bus.devices = sc->sc_otg.sc_devices;
+ sc->sc_otg.sc_bus.devices_max = DWC_OTG_MAX_DEVICES;
+
+ /* get all DMA memory */
+ if (usb_bus_mem_alloc_all(&sc->sc_otg.sc_bus,
+ USB_GET_DMA_TAG(dev), NULL)) {
+ return (ENOMEM);
+ }
+ rid = 0;
+ sc->sc_otg.sc_io_res =
+ bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, RF_ACTIVE);
+
+ if (!(sc->sc_otg.sc_io_res)) {
+ err = ENOMEM;
+ goto error;
+ }
+ sc->sc_otg.sc_io_tag = rman_get_bustag(sc->sc_otg.sc_io_res);
+ sc->sc_otg.sc_io_hdl = rman_get_bushandle(sc->sc_otg.sc_io_res);
+ sc->sc_otg.sc_io_size = rman_get_size(sc->sc_otg.sc_io_res);
+
+ rid = 0;
+ sc->sc_otg.sc_irq_res =
+ bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE);
+ if (sc->sc_otg.sc_irq_res == NULL)
+ goto error;
+
+ sc->sc_otg.sc_bus.bdev = device_add_child(dev, "usbus", -1);
+ if (sc->sc_otg.sc_bus.bdev == NULL)
+ goto error;
+
+ device_set_ivars(sc->sc_otg.sc_bus.bdev, &sc->sc_otg.sc_bus);
+
+ err = bus_setup_intr(dev, sc->sc_otg.sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
+ NULL, (driver_intr_t *)dwc_otg_interrupt, sc, &sc->sc_otg.sc_intr_hdl);
+ if (err) {
+ sc->sc_otg.sc_intr_hdl = NULL;
+ goto error;
+ }
+ err = dwc_otg_init(&sc->sc_otg);
+ if (err == 0) {
+ err = device_probe_and_attach(sc->sc_otg.sc_bus.bdev);
+ }
+ if (err)
+ goto error;
+ return (0);
+
+error:
+ dwc_otg_detach(dev);
+ return (ENXIO);
+}
+
+static int
+dwc_otg_detach(device_t dev)
+{
+ struct dwc_otg_super_softc *sc = device_get_softc(dev);
+ device_t bdev;
+ int err;
+
+ if (sc->sc_otg.sc_bus.bdev) {
+ bdev = sc->sc_otg.sc_bus.bdev;
+ device_detach(bdev);
+ device_delete_child(dev, bdev);
+ }
+ /* during module unload there are lots of children leftover */
+ device_delete_children(dev);
+
+ if (sc->sc_otg.sc_irq_res && sc->sc_otg.sc_intr_hdl) {
+ /*
+ * only call dwc_otg_uninit() after dwc_otg_init()
+ */
+ dwc_otg_uninit(&sc->sc_otg);
+
+ err = bus_teardown_intr(dev, sc->sc_otg.sc_irq_res,
+ sc->sc_otg.sc_intr_hdl);
+ sc->sc_otg.sc_intr_hdl = NULL;
+ }
+ /* free IRQ channel, if any */
+ if (sc->sc_otg.sc_irq_res) {
+ bus_release_resource(dev, SYS_RES_IRQ, 0,
+ sc->sc_otg.sc_irq_res);
+ sc->sc_otg.sc_irq_res = NULL;
+ }
+ /* free memory resource, if any */
+ if (sc->sc_otg.sc_io_res) {
+ bus_release_resource(dev, SYS_RES_MEMORY, 0,
+ sc->sc_otg.sc_io_res);
+ sc->sc_otg.sc_io_res = NULL;
+ }
+ usb_bus_mem_free_all(&sc->sc_otg.sc_bus, NULL);
+
+ return (0);
+}
+
+static device_method_t dwc_otg_methods[] = {
+ /* Device interface */
+ DEVMETHOD(device_probe, dwc_otg_probe),
+ DEVMETHOD(device_attach, dwc_otg_attach),
+ DEVMETHOD(device_detach, dwc_otg_detach),
+ DEVMETHOD(device_suspend, bus_generic_suspend),
+ DEVMETHOD(device_resume, bus_generic_resume),
+ DEVMETHOD(device_shutdown, bus_generic_shutdown),
+
+ DEVMETHOD_END
+};
+
+static driver_t dwc_otg_driver = {
+ .name = "dwc_otg",
+ .methods = dwc_otg_methods,
+ .size = sizeof(struct dwc_otg_super_softc),
+};
+
+static devclass_t dwc_otg_devclass;
+
+DRIVER_MODULE(dwcotg, atmelarm, dwc_otg_driver, dwc_otg_devclass, 0, 0);
+MODULE_DEPEND(dwcotg, usb, 1, 1, 1);
More information about the Zrouter-src-freebsd
mailing list